Cedar Plywood - MDF CORE

At Koenig Machinery, we're committed to providing high-quality acrylic sheets. Please review the following information before purchasing.

Colour Accuracy Disclaimer

We take care to ensure all acrylic product images are photographed using colour-calibrated equipment and controlled lighting to provide the most accurate representation possible.

However, colours and tones may appear differently depending on the device used to view them. Variations in monitors, phones and tablets — including brightness, contrast and colour settings — can affect how colours are displayed.

Unless a viewing device has been professionally calibrated, the colour shown on screen may differ slightly from the physical material.

For colour-critical applications, we recommend purchasing a sample or swatch pack prior to ordering. Colour variation caused solely by screen display differences is not generally a reason for return or refund, subject to your rights under Australian Consumer Law.

Surface & Film Appearance

Some sheets may have minor marks, wrinkles or imperfections in the protective film or acrylic itself. Grade 2 sheets may show these more noticeably, which is reflected in their pricing.

Protective Film

Wrinkles in the protective film may sometimes cause light fogging after laser cutting. Use an appropriate acrylic-safe cleaning product.

Removing Protective Film

Film on sheets stored for extended periods may adhere more firmly. This does not normally affect the acrylic itself.

• Apply gentle heat using a hair dryer or low-temperature heat gun.
• Avoid overheating the acrylic.
• Use masking tape to lift difficult edges.
• Roll the film back over itself and peel slowly.
• Use a plastic scraper or rounded tool where necessary.
• Remove residue using a cleaner suitable for acrylic.

Storage & Care

Store acrylic sheets flat, away from heat and direct sunlight to prevent warping or damage to the protective film.

Sheet Sizes & Tolerances

Actual sheet dimensions may be slightly larger than advertised. For example, 1200 × 900 mm may measure approximately 1220 × 905 mm. The 300 × 200 mm option is cut to the specified size.

• Thickness: ±10%
• Cutting: ±5 mm

Shipping is generally more economical for smaller sheets weighing up to 22 kg.

Acrylic Sheet Weight

Weight (kg) = Width (m) × Length (m) × Thickness (mm) × 1.19

• 3 mm, 200 × 300 mm: 215 g
• 3 mm, 300 × 600 mm: 643 g
• 3 mm, 600 × 600 mm: 1.28 kg
• 3 mm, 600 × 900 mm: 1.93 kg

Cutting Safety

Always use appropriate ventilation and fume extraction when cutting acrylic.