Flux
FLUX Beamo
Compact desktop CO2 laser. A simple first machine for younger students.
Price on the Flux store
View machine →Opens the Flux storeLaser Cutters for Schools, TAFEs and Universities
Primary, secondary, TAFE and university
Quoted, delivered, installed and taught on site
Laser cutters for primary schools, secondary schools, TAFEs and universities. Request a quote, send us a purchase order when it is approved, and we handle delivery, installation and training.
- Purchase orders accepted
- Installation and staff training available
- Showrooms in Melbourne, Sydney and Queensland
Trusted by schools, universities and TAFEs across Australia
Find the right machine for your school
Choose your school type to see the machines we recommend.
Recommended for primary schools
All CO2 lasers →
Flux
FLUX Beambox II 55W
Desktop CO2 laser with a larger bed for whole-class projects.
Price on the Flux store
View machine →Opens the Flux store
xTool
xTool P2S 55W
Enclosed desktop CO2 laser with camera positioning.
Price on the xTool store
View machine →Opens the xTool store
Koenig Rapid
Koenig Rapid 40W
60 × 40cm bed. Fits a bench, installed and supported by Koenig.
$8,950 ex GST
View machine →
Koenig Rapid
Koenig Rapid 60W
60 × 60cm bed. More power for thicker materials.
$9,800 ex GST
View machine →Recommended for secondary schools
All CO2 lasers →
New K2 series
K2 CO2 Laser, 90 × 60cm
100W or 150W. The D&T workshop all-rounder.
From $12,450 ex GST
View machine →
New K2 series
K2 CO2 Laser, 130 × 90cm
100W, 150W or 280W. Larger projects and senior folios.
From $13,950 ex GST
View machine →
New K2 series
K2 CO2 Laser, 130 × 130cm
100W, 150W or 280W. Half-sheet capacity for busy workshops.
From $15,550 ex GST
View machine →Recommended for TAFE and university
All fiber lasers →
Fiber laser
Gweike LF1309
Small enclosed fiber laser for metal cutting in a training workshop.
$59,900 ex GST
View machine →
Fiber laser
Gweike LF1313
Half-sheet enclosed fiber laser for fabrication courses.
$67,500 ex GST
View machine →
Fiber laser
Gweike LF3015P Pro
Full-sheet enclosed fiber laser with slide-out table.
$84,900 ex GST
View machine →Running design courses as well? The K2 CO2 series under Secondary also suits TAFE and university workshops.
Ask us about bundle packs
Combine your machine with support and consumables in one quote, so there is only one purchase order to approve.
- Installation and staff training On-site setup and hands-on training for your staff. Booking details →
- Spare parts Keep a few on hand so a worn part does not stop a class. Shop spare parts →
- Servicing Routine maintenance by a Koenig technician, on request. Service bookings →
- Starter materials Swatch packs for testing materials and getting classes started. Shop swatch packs →
- Fume extraction Tell us your room and machine and we will recommend a unit. Ask in your quote →
How schools buy from us
Built around your school's approval process, not a shopping cart.
-
1Request a quoteTell us about your space, users and budget. We send a formal quote you can take to your business manager.
-
2Send a purchase orderOnce it is approved, email us your PO. Need supplier or vendor set-up details? We send them with your quote.
-
3Delivery, installation and trainingKoenig technicians install the machine and train your staff on site, so you are cutting from day one.
Prefer to talk? Call Melbourne (03) 9037 0826, Sydney (02) 8408 0265 or Queensland (07) 2802 5475.
Support that stays after the install
Koenig-approved technicians, Australia wide, for the life of the machine.
Installation and setup
Installed and tested on site by a Koenig technician, ready for class.
Staff training
Hands-on training for teachers and technicians, from file setup to material handling.
Technical support
Phone and email help with software, settings and troubleshooting.
Servicing and spare parts
Routine maintenance on request, plus spare parts and accessories. Book a service
What teachers say
“The kids have taken to it so quickly. They’re confident, creative, and many now understand the machine better than the teachers. That level of engagement is hard to teach, it comes from the hands-on access this machine allows.”
Download our 2026 brochure
Our machine range in one PDF, ready to share with your faculty or business manager.
Need supplier or vendor set-up details for your finance team? Ask in your quote request and we will send them with your quote.
Questions schools ask
Do you accept purchase orders?
Yes. Request a quote, then email your PO once it is approved.
What warranty applies?
See our warranty policy for full terms.
Where do we buy materials?
Order acrylic, timber and swatch packs online. Koenig machine owners get 10% off laser materials for life. Shop laser materials
Can we see a machine before we buy?
Yes. Book a demo at our Melbourne, Sydney or Queensland showroom.
Why laser cutters belong in STEM education
Students move from a design on screen to a finished object in one lesson, which makes abstract concepts concrete.
STEM in practice
Automation, precision and design, from simple models to working prototypes.
Design and technology
Custom parts and prototypes in timber, acrylic and card.
Art and craft
Detailed cuts on paper, timber and fabric, repeatable for a whole class.
Personalised projects
Nameplates, keyrings and gifts that students take ownership of.
Enterprise skills
Design, make and sell a product: pricing, marketing and production in one unit.
Teamwork
Group projects that need planning, troubleshooting and communication.
Read more about laser cutters in schools and universities
Laser cutters give students practical experience in CAD, product design and material science. A design drawn in class can be cut, tested and revised in the same lesson, so students learn to iterate the way engineers and designers do.
Our CO2 lasers cut and engrave timber, acrylic, card, paper, leather and fabric, which opens the machine to art, design and technology classes as well as STEM. Bed sizes run from a 60 × 40cm classroom machine to full-sheet workshop models, so the machine can match the room and the projects.
In a shared maker space or library, an enclosed machine with simple software lets staff supervise new users while experienced makers take on larger projects. We install the machine, train your staff and stay available for support and servicing after the install.
See one running before you decide
Book a demo at our Melbourne, Sydney or Queensland showroom. Melbourne (03) 9037 0826, Sydney (02) 8408 0265, Queensland (07) 2802 5475.