Cedar Varnished Plywood

SKU: PV13-3-2030

$5.25

Note: The circular shape shown in product images is for illustrative purposes only. Acrylic is supplied as flat square/rectangular sheets according to the selected size variant.

Material Finish

Our Varnished laser plywood has an A-A grade finish, meaning that both sides of the sheet are high quality both isdes with varnished satin look finsh and PE protective film. Note that colours may vary when viewed on different monitors, For exact colour swatches you can purchase sample swatch packs. See sample swatches in the materials list.
Please also note the PE protective film is safe to cut thorgh however when engraving this film should be removed for the best quality finsih. The siface can be masked with paper tape or the surface can be cleaned after cutting and engraving with Methylated spirits or isopropyl alcohol. You may seee a white edge when cutting and engraving. For engraving you can use an oil to reduce any white edge and may fine that paint filling the egrave gives a better outcome with stronger contrast, for cutting is it recommended to cut faster with good air assist to reduce any white edge.

Material structure

Our laser plywoods are designed specifically with laser cutting in mind. The material has an MDF core and is a very popular material in our range, offering structurally rigidity. This veneer ply is great for structural items and large thin signage that will not bow warp or bend. The MDF core is also a solid apprearance and so give to look of a solid wood when laser cut. Our plywood materials are all manufactured with formaldehyde free glue adhesives.

Why use laser ply?

There are many plywoods materials available in the industry, many of which are built for construction and exterior use. These plywoods are manufactured with different types of glue and resin that may be hard to cut, increasing your cutting time, edge charring and chance of laser cutting flame. They also may be manufactured with glue containing formaldehyde. Using out laser ply, you will have a cleaner faster and safer laser cut with lighter cut edge colour.

⚠️ Important Product Information CLICK TO VIEW

Note: The circular shape shown in product images is for illustrative purposes only. Acrylic is supplied as flat square/rectangular sheets according to the selected size variant.

At Koenig Machinery, we’re committed to providing high-quality acrylic sheets. Due to the nature of the material and its manufacturing process, please take note of the following:

Colour Accuracy Disclaimer

We take care to ensure all acrylic product images are photographed using colour-calibrated equipment and controlled lighting to provide the most accurate representation possible.

However, colours and tones may appear differently depending on the device used to view them. Variations in monitors, phones and tablets — including brightness, contrast and colour settings — can affect how colours are displayed. Unless a viewing device has been professionally calibrated, the colour shown on screen may differ slightly from the physical material.

For colour-critical applications, we recommend purchasing a sample or swatch pack prior to ordering. Due to these variables, colour variation caused by screen display differences cannot be accepted as a reason for return or refund.

Surface & Film Appearance

Some sheets may have minor marks, wrinkles, or imperfections in the protective film or acrylic itself. Grade 2 sheets may show these more noticeably, which is reflected in their pricing.

Protective Film

Wrinkles in the film can sometimes cause light fogging after laser cutting. This can be easily cleaned with isopropyl alcohol or similar acrylic-safe products.

Removing the Protective Film

If acrylic sheets have been stored for an extended period, the protective film may adhere more firmly and be harder to remove. This is normal and does not affect the acrylic itself.

Apply gentle, even heat using a heat gun on a low setting or a hair dryer.
Warm the film slightly — do not overheat — to help soften the adhesive.
If the edge is difficult to lift, press masking tape or packing tape firmly onto a corner and pull back slowly.
Roll the film back over itself rather than pulling straight up.
Use a wooden dowel, plastic scraper, or rounded tool to gently lift stubborn edges without scratching the acrylic.
Peel the film off slowly and evenly to reduce tearing.
If residue remains, remove it with a mild cleaner or isopropyl alcohol suitable for acrylic.

Storage & Care

Always store acrylic sheets flat and away from heat or direct sunlight to prevent warping or damage to the protective film.

Sheet Sizes & Tolerances

Actual sheet sizes may be slightly larger than listed. For example, 1200 × 900 mm may measure approximately 1220 × 905 mm. This can make cutting easier. The 300 × 200 mm option is always cut to the exact size.