Search
Close this search box.
Search
Close this search box.

LF60M Tube – Manual Loading

Tube Cutting Fiber Laser 1-6kW

The LF60M is our manual loading tube cutting machine. With quick pneumatic clamping design the machine will grab down onto any diameter from 20-240mm (with options up to 280mm or 360mm) without the need to change or adjust the clamping chuck. Fractional automatic supports keep the tube perfectly supported along the length while cutting and the enclosure surrounding the cutting head provide protection for the operator.

Professional cutting of not only standard closed tube profiles, but any I-beam, H-beam, C-channel or custom profiles. Create complex 3D designs, remove the need for complex welding jigs. 5-axis heads available for 45 degree and bevel cutting.  

From $114,300 *ex GST

LF60M Tube – Manual Loading

Tube Cutting Fiber Laser 1-6kW

From $114,300 *ex GST

The LF60M is our manual loading tube cutting machine. With quick pneumatic clamping design the machine will grab down onto any diameter from 20-240mm (with options up to 280mm or 360mm) without the need to change or adjust the clamping chuck. Fractional automatic supports keep the tube perfectly supported along the length while cutting and the enclosure surrounding the cutting head provide protection for the operator.

The LF60M is our manual loading tube cutting machine. With quick pneumatic clamping design the machine will grab down onto any diameter from 20-240mm (with options up to 280mm or 360mm) without the need to change or adjust the clamping chuck. Fractional automatic supports keep the tube perfectly supported along the length while cutting and the enclosure surrounding the cutting head provide protection for the operator.

Professional cutting of not only standard closed tube profiles, but any I-beam, H-beam, C-channel or custom profiles. Create complex 3D designs, remove the need for complex welding jigs. 5-axis heads available for 45 degree and bevel cutting.  

Up to 7m tube stock with model LF60M (10m stock length LF90M, 12.5m stock length with LF120M)

Small end piece requirement – 100mm

Dual electronic tube clamping and alignment – no manual chuck adjustment required

Clamping range 20-240mm standard (20-280mm Chuck or 20-360mm chuck upgrade available)

Fractional automatic supports along the length of the machine to avoid deformation during cutting (servo-controlled option available for longer weaker profiles such as bar and angle iron)

Cypcut controller using TubesT Pro professional tube cutting and design software – allowing for all closed and open tube profiles, custom profile design, 3D cut design, nesting etc.

Cypcut 5000 control system with BCS100 Automatic material tracking system, predict and avoid collisions and controls the tube support height electronically

BOCI or Raytools precision automatic focussing laser head with fine 3D tip (5-axis options available)

Large Portrait style monitor screen with wireless controller

TBI Ball screw drive system, Panasonic Servo motors

Hiwin guide rails and automatic lubrication system

Panasonic Servo motors

Automatic lubrication system

Electronic regulators for all gas connections O2, N2 and compressed air, allowing for fully software-controlled pressure

Materials and Application

Profiles –Round tube, Oval tube, D tube, spure tube, RHS, C-channel, I-beam, H-beam/channel, Angle and custom profiles. 

Examples

LF60M Tube – Manual Loading

Technical Parameters Specification
Laser Power 1kW, 1.5kW, 2kW, 3kW, 4kW, 6kW
Tube Length

LF60M – 6m Standard model – up to 7m tube length (100mm min end piece)
LF90M – 9m model – up to 10m tube length (100mm min end piece)
LF90M – 9m model – up to 12.5m tube length (100mm min end piece)

Minimum waste stock length 100mm
Clamp Diameter 20-240mm standard (20-280mm Chuck or 20-360mm chuck upgrade available)
Tube weight capacity 240mm chuck = 500kg, 280mm chuck = 400kg, 360mm chuck = 500kg
Machine Size

LF60M – 12450mm*19190mm *2515m (including collection draw)
LF90M – 15454mm*19190mm*2515m (including collection draw)
LF120M – 15454mm*19190mm*2515m (including collection draw)

Laser source type MAX, Raycus or IPG
Laser Head Type

Automatic focussing laser head with “3D” fine tip
1-2kW = Raytools BM111
3kW = BOCI BLT421
4-6kW = BOCI BLT441
(5 axis head options available – Raytools/BOCI or German LT)

Cooling Type Industrial Water Cooling – S&A water chiller
Moving Speed 30m/min
Acceleration 1.5G
Laser Output Control 0-100% set by software
Drive method TBI ball screen drive, Panasonic servo motor control with Hiwin guide rails
Positioning Accuracy 0.03 mm
Re-positioning accuracy 0.02mm
Minimum line width 0.1mm
Controlling Software Cypcut Control System 5000 – sheet cutting, TubesT lite (standard) or TubesT Pro upgrade – tube
Graphic Format Supported Graphics files – Ai, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc.
Compatible Software Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc. 
Colour Separation Yes (imports colours to control cutting layers)
Auxiliary Equipment Exhaust Fan, Industrial water-cooling unit 
Power Supply

Machine:

1kW = 415V 50Hz 20amp 

1.5kW = 415V 50Hz 32amp 

2kW = 415V 50Hz 50amp 

3kW = 415V 50Hz 50amp 

4kW = 415V 50Hz 60amp 

 6kW = 415V 50Hz 63amp

Gas Regulation

Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure)

And high pressure N2 and Compressed air electronic regulator (high pressure cutting)

Gas connection

O2 (mild steel and copper cutting) – 4 pack min

   Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure

N2 (Stainless, Aluminium, Brass and thin Mild steel cutting) – 9 pack min

   Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure

Compressed air (Stainless, Aluminium, Brass and thin Mild steel cutting)

SEE OUR 18DHY-18Bar or 20DHY-20Bar COMPRESSOR OPTIONS

Working Environment Temperature:0-45C, Humidity 5-95% (No Condensate Water)
Technical ParametersSpecification
Laser Power1kW, 1.5kW, 2kW, 3kW, 4kW, 6kW
Tube Length LF60M – 6m Standard model – up to 6500mm tube length (350mm minimum stock length) LF90M – 9m model – up to 9500mm tube length (350mm minimum stock length)
Minimum waste stock length 100mm
Clamp Diameter20-240mm standard (20-280mm Chuck or 20-360mm chuck upgrade available)
Tube weight capacity240mm chuck = 500kg, 280mm chuck = 400kg, 550mm chuck = 500kg
Machine SizeLF60M – 11900mm*1580mm*2260m (including collection draw) LF90M – 15454mm*19190mm*2515m (including collection draw)
Laser source type Raycus or IPG
Laser Head Type Raytools automatic focussing fine tipped “3D” laser head ≤3kW = BM111 4kW = BD04K 6kW = BD08K (5 axis head options available – Raytools GF40 or German LT)
Cooling Type Industrial Water Cooling – S&A water chiller
Cutting Speed30m/min
Acceleration1.5G
Laser Output Control 0-100% set by software
Drive method TBI ball screen drive, Panasonic servo motor control with Hiwin guide rails
Positioning Accuracy 0.03 mm
Re-positioning accuracy 0.02mm
Minimum line width 0.1mm
Controlling Software Cypcut Control System 5000 – sheet cutting, TubesT lite (standard) or TubesT Pro upgrade – tube
Graphic Format Supported Graphics files – Ai, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc.
Compatible Software Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc.
Colour Separation Yes (imports colours to control cutting layers)
Auxiliary Equipment Exhaust fan, Industrial water cooling unit
Power Supply Machine: 1kW = 415V 50Hz 20amp 1.5kW = 415V 50Hz 32amp 2kW = 415V 50Hz 50amp 3kW = 415V 50Hz 50amp 4kW = 415V 50Hz 60amp 6kW = 415V 50Hz 63amp
Gas Regulation Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure) And high pressure N2 and Compressed air electronic regulator (high pressure cutting)
Gas ConnectionO2 (mild steel and copper cutting) – 4 pack min Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure N2 (Stainless, Aluminium, Brass and thin Mild steel cutting) – 9 pack min Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure Compressed air (Stainless, Aluminium, Brass and thin Mild steel cutting) SEE OUR 18DHY-18Bar or 20DHY-20Bar COMRESSOR OPTIONS
Working Environment Temperature:0-45C, Humidity 5-95% (No Condensate Water)

Tube Fiber LF60M Product Catalogue

Customise Your Laser Machine

Laser Source
Choose Power (NOTE: For Aluminium Brass anc copper choose any power in IPG, 3/6kW in MAX or 6kW in Raycus)
Laser Head
Choose your laser head
Compressor
Choose Optional Compressor
Air Filter
Choose Optional Air Filter
Other
Other Optional Options
Light Curtain Safety System
$2,800.00
Gas attachment pack
$2,950.00
Tube Length
Choose Tube Length
Tube Diameter
Choose Tube Diameter

Related Products

X

Shipping

We are committed to delivering your products to your premises as safely as possible. Our service delivers Australia-wide and is dedicated to meeting a variety of shipping needs.

Shipping is calculated based on your location and the weight of the item/s you have chosen to purchase.

Shipping is calculated at checkout, machines are shipped by standard feight. In regards to larger Fiber lasers a member of the Koenig Machinery Service team will contact you to arrange shipping logistics. 

Laser Materials

Standard Click and Collect:

We can have your orders processed for next day pick up.

Express Click and Collect:

If ordered before llam, we will have your materials ready that day for pickup.

Opt for click and collect at checkout.

Warranty

Co2 Laser Machine Warranty 

All Co2 Machines come with a standard 1 year warranty as required by our local Australian Consumer Protection Law. 

Co2 Machine Warranty – 1 year – excluding consumables.
Co2 Laser Tube Warranty – 9 months.
*40watt tubes and below – 6 months
*Yongli Tubes –  1 year

Fiber Laser Machine Warranty

All Fiber Laser Machines come with a standard 1 year warranty as required by our local Australian Consumer Protection Law. 

Fiber Machine Warranty – 1 year – excluding consumables.
Fiber Power Source Warranty – 2 years

After sales warranty of Laser Machines
Call out service Co2 and fiber lasers – included for the first year given there is a machine fault.
Service fees will be charged at an hourly service rate if there is a user fault. Depending on location and machine type, shipping back to the nearest Koenig office for service and repair might be used as it can be more efficient and cost effective. 

Phone and email technical support as deemed reasonable is free and included for the life of your machine.

NOTE: The warranty does not include consumable parts, such as mirrors, lenses belts, gas fitting, nozzles and bearings.

Extended Warranties

Koenig as a policy does not offer extended warranties on machines, we see extended warranties such as on parts, excluding labour as exploitative to the end user and  we prefer to be honest and fair in regards to service costs and service related parts. Extended warranties are profitable for companies but we see them as junk insurance to exploit the buyer ergo the customer.

Returns

If your laser is faulty or damaged upon arrival please contact us directly. We will either organise a refund or ship you a replacement.

If it’s determined that the material was damaged on your behalf, you will not qualify for a refund or replacement.