Search
Close this search box.
Search
Close this search box.

White on Blue 2 PLY – RowMAX

From $
9.5
inc GST
ex GST
SKU: MX08 Category:

Buy in Bulk and Save

QuantityBuy 5+Buy 10+Buy 20+
Discount5%7%10%

Purchase multiples of the same material/colour in the same size to achieve this discount

* GST will be added when you check out.

Koenig Machinery’s 2-Ply engraving label material commonly known as RowMax, LaserMax or Traffolyte engraving plastic, comes in a range of colours with a sheet thickness of 1.5mm. This laser label material is suitable for indooroutdoor applications and is UV Stable. All sheets are protected with a durable PE film coating to preserve its appearance during shipping and storage. We do not offer custom cut sizes or a cut down service.

  • Buy in bulk and save with our tier discount buy incentive dispatching Australia wide!
  • FULL SIZED sheets (1220x2440mm) are not available in this range.

Buy in Bulk and Save

QuantityBuy 5+Buy 10+Buy 20+
Discount5%7%10%

Purchase multiples of the same material/colour in the same size to achieve this discount

White on Blue 2 PLY – RowMAX

Material Finish Our 2 ply RowMAX from Rowmark is a high impact acrylic with laminated foil finish as specified above on the top side, matt finish on the back side. The materials are UV stabalised for indoor and outdoor use! For exact colour swatches you can purchase sample swatch packs. See sample swatches in the materials list.   Protective masking The top side of the acrylic, with foil layer, is coated in a protective plastic film, for protection during transport and storage. For best results with your acrylic ensure that it is stored lying flat to avoid warpage, remove plastic film before etching.   Cutting / Engraving tips When cutting our 2 ply materials your air assist should be on and high. When engraving ensure to remove the plastic protective film, then etch with the air assist off completely or extremely low to avoid the smoke dropping on the surface creating a smudged colour effect. The etching power should be low so as only to etch through the top colour surface. For specific speed an power setting refer to your KOENIG laser machine cutting library   Material application Two tone materials can be laser etched or engraved. These materials are used for trophies, labels, warning signs, name plates etc. Our two tone foil materials are interior grade, with up to 5 year UV stability outdoors.
Technical Information
Thickness is subject to tolerance +/- 10%
Sheet size is subject to cutting tolerance +/- 5mm
Material sheets are available in various sheet sizes and finishes
Shipping is generally more economical in smaller sized sheets, up to 22kg in weight. To calculate approximate acrylic sheet weight use the following formula:
Weight (kg = Width(m) *Length (m)*Thickness (mm)*1.19
For example the following is the weight estimate per sheet:

3mm Thick Acrylic 200*300mm = 215g

3mm Thick Acrylic 300*600mm = 643g

3mm Thick Acrylic 600*600mm = 1.28kg

3mm Thick Acrylic 600*900mm = 1.93kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

What Else Do You Need To Know?

Frequently Asked Questions

Below you will find some common questions our customers have asked about our Laser Machines
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer ultrices, nisi pellentesque varius fringilla, nibh neque vestibulum tellus, non vestibulum lorem diam sed lectus.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer ultrices, nisi pellentesque varius fringilla, nibh neque vestibulum tellus, non vestibulum lorem diam sed lectus.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer ultrices, nisi pellentesque varius fringilla, nibh neque vestibulum tellus, non vestibulum lorem diam sed lectus.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer ultrices, nisi pellentesque varius fringilla, nibh neque vestibulum tellus, non vestibulum lorem diam sed lectus.

Related Products

Sign Up To Our Newsletters

Signup to get expert advice, latest industry news, trends and tips on laser cutting sent directly to your inbox.

X

Need Help?

FAQs

Visit our FAQs page to find answers to common questions.

Customer Support

We are available Monday to Friday.
Call us on (03) 9037 0826

Contact

Want to get in touch with our teams? Visit our contact page to send us a message.

Shipping

We are committed to delivering your products to your premises as safely as possible. Our service delivers Australia-wide and is dedicated to meeting a variety of shipping needs.

Shipping is calculated based on your location and the weight of the item/s you have chosen to purchase.

Shipping is calculated at checkout, machines are shipped by standard feight. In regards to larger Fiber lasers a member of the Koenig Machinery Service team will contact you to arrange shipping logistics. 

Laser Materials

Standard Click and Collect:

We can have your orders processed for next day pick up.

Express Click and Collect:

If ordered before llam, we will have your materials ready that day for pickup.

Opt for click and collect at checkout.

Returns

If your material is faulty or damaged upon arrival please contact us directly. We will either organize a refund or ship you a replacement.

If it’s determined that the material was damaged on your behalf, you will not qualify for a refund or replacement.

Secure Payment

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

We accept payments with:

Visa, MasterCard, American Express, Paypal, and more.

Returns

If your is faulty or damaged upon arrival please contact us directly. We will either organise a refund or ship you a replacement.

If it’s determined that the material was damaged on your behalf, you will not qualify for a refund or replacement.

Warranty

Co2 Laser Machine Warranty 

All Co2 Machines come with a standard 1 year warranty as required by our local Australian Consumer Protection Law. 

Co2 Machine Warranty – 1 year – excluding consumables.
Co2 Laser Tube Warranty – 9 months.
*40watt tubes and below – 6 months
*Yongli Tubes –  1 year

Fiber Laser Machine Warranty

All Fiber Laser Machines come with a standard 1 year warranty as required by our local Australian Consumer Protection Law. 

Fiber Machine Warranty – 1 year – excluding consumables.
Fiber Power Source Warranty – 2 years

After sales warranty of Laser Machines
Call out service Co2 and fiber lasers – included for the first year given there is a machine fault.
Service fees will be charged at an hourly service rate if there is a user fault. Depending on location and machine type, shipping back to the nearest Koenig office for service and repair might be used as it can be more efficient and cost effective. 

Phone and email technical support as deemed reasonable is free and included for the life of your machine.

NOTE: The warranty does not include consumable parts, such as mirrors, lenses belts, gas fitting, nozzles and bearings.

Extended Warranties

Koenig as a policy does not offer extended warranties on machines, we see extended warranties such as on parts, excluding labour as exploitative to the end user and  we prefer to be honest and fair in regards to service costs and service related parts. Extended warranties are profitable for companies but we see them as junk insurance to exploit the buyer ergo the customer.

Returns

If your material is faulty or damaged upon arrival please contact us directly. We will either organise a refund or ship you a replacement.

If it’s determined that the material was damaged on your behalf, you will not qualify for a refund or replacement.

In some circumstances we offer a return policy, please check out our policy on the bottom of the page “returns and refunds”. These policies differ from materials and accessories to larger machinery. 

Contact An Expert

Fill out the form below or call us on (03) 9037 0826

This field is for validation purposes and should be left unchanged.

Setup

Set up and training does depend on your machine type and location. Depending on your own skill set and ability to absorb our training material we have several options for you. 
You can have one of our highly trained technicians to install your machine at your premises Australia wide. However, if you’re rural and want to look at setting up the machine yourself, we have videos and guides to assist you with the installation process. 

Finance

We have several finance options that we can offer and we are happy to work with your existing financial brokers. Give us a call today for more information and pricing options. Finance on larger machines is a great option for tax and cash flow benefits. Speak to a finance broker or your accountant to see what terms you can achieve and what makes sense for your machine and business plan.  

We at Koenig Machinery are hesitant to offer the buy now pay later finance options for materials due to the inherent debt trap it has the potential to create for small or start up businesses. 

Support

At Koenig machinery we pride ourselves on the quality of our after sales and service support. We offer ongoing free phone call and email support for the life of your machine. 

Our aim is to arm you with as much information and support to ensure you feel comfortable in using your machine to its productive capacity. Leaving you only with creative, design and business required to ensure your own success.  

Warranty

All materials come with a 1 year machine warranty which covers all machine parts plus, a 6 month warranty for the laser tube.

If you experience any problems with your machine throughout the warranty period please contact us. Any issues outside warranty will undergo a consult to identify the issue and cost for fixing.

You can apply for an extended warranty by giving us a call.