Close this search box.
Close this search box.

KM1325FC Fiber CO2 combination Laser machine
Metal Laser Cutter Head
Fiber Laser Cutter Lens

KM1325FC Fiber/CO2 Combination Machine
Fiber Power: 1-2kW
CO2 Laser : 280W Joy Laser

Metal/Non-Metal Fiber/CO2 Laser Cutter
1300x2500mm bed
FROM $72,950 +GST

 Request a Quote

“The KM1325FC is our economical full sheet combination fiber and CO2 laser designed for both metal and non-metal laser cutting. With Cypcut software, BCS100 precision surface tracking and Raytools laser head, this model is like no other Fiber/CO2 combination machine on the market, with ball-screw drive system, this machine offers high precision and high reliability to suit both small
and medium businesses. This model is available as an open bed or can be enclosed with the addition of a Class 1 CE Certified full enclosure.”

Video Demonstration

Materials and Applications

With 280W – Cut up to 25mm Wood/Ply/Bamboo/MDF, 30mm Acrylics, Perspex, laminates etc.
Also cutting leather, paper, cardboard, rubber (stamps), foam, felt, fabric, etc.

1kW – Up to 10mm Mild Steel, 5mm Stainless Steel, 3mm Aluminium, 2mm Brass
1.5kW – Up to 14mm Mild Steel, 7mm Stainless Steel, 5mm Aluminium, 3mm Brass
2kW – Up to 18mm Mild Steel, 9mm Stainless Steel, 8mm Aluminium, 5mm Brass
NOTE: IPG laser source required for aluminium, Brass and other non-ferrous metal cutting.

How Thick Can You Cut with the Fiber Laser ?



  • Combination metal/non-metal cutting with huge 280W CO2
  • 1300x2500mm open bed Class 4 laser with option to add
    Class 1 full enclosure
  • Cypcut software – Easy to use and compatible with most files
  • Automatic edge seeking
  • BCS100 Automatic material tracking – Follows material surface
    allowing cutting of materials with sight bending or warping
  • Raytools precision automatic focussing laser head -metal cutting
  • Positioning and re-positioning accuracy 0.03mm
  • Large Portrait monitor, built-in computer, and wireless controller
  • Aviation 3rd generation aluminium gantry – Lightweight and
  • Delta servo motor drive
  • Dual TBI ground ball screw drive – Extremely high precision and
    supported on 2 both sides
  • HIWIN guide rails
  • BCS100 Automatic material tracking – Follows material surface
    allowing cutting of materials with sight bending or warping
  • Ball bearing rollers for loading on the front and right side
  • Protective cover for drive system
  • Industrial S&A water cooling unit
  • Under table exhaust system, high pressure exhaust fan included
  • Electronic regulators for all gas connections O2, N2 and
    compressed air, allowing for fully software controlled pressure

Combination Cutting Machine

The LF1325L is a dual fiber and CO2 laser cutter, which can be used for both metal and non-metal applications.

It allows you to cut thin sheet metals such as carbon, stainless/galvanised steel and aluminium, whilst also having the ability to cut and etch acrylic, wood, fabric and more.

Raytools Automatic Focussing Laser Head

The software adjusts the focussing lens to determine the most suitable position for different thicknesses of material. Automatically adjusting the focus lens is ten times faster than manually adjusting, saving you precious time.

Dual Rail & Dual Driver Design

The Y-axis on both sides are equipped with two guide rails to prevent cutting line deformation that could be caused by the Y-axis screw bending.

The double ball drive screw ensures straightness and arc degree during high-speed cuts.

Aviation 3rd Generation Aluminium Gantry

The Aviation 3rd generation aluminium gantry is manufactured with aerospace standards and formed by 4300 tons press extrusion moulding.

 Aviation aluminium has many advantages, such as exceptional toughness, corrosion resistance and anti-oxidation. 3rd Generation Aluminium Gantry | Fiber Laser for Cutting Metal

Superior Cutting Precision

Automatic edge seeking works to improve your productivity and efficiency by tracking the workpiece and measuring where the edge is located. This ensures you do not have to keep moving and readjusting heavy materials.

Automatic material tracking is ideal for accommodating materials with slight bending or warping because it follows the surface and calculates differences. 

Technical Parameters Specification
Fiber Laser Power 1kW – 2kW Fiber, 150W CO2
CO2 Laser Power 280W
Cutting Area 1250 x 2500mm
Machine Size 3800*1850*1300mm
Laser Source Type Raycus or IPG Fiber + JOY CO2 laser tube
Laser Head Type Raytools Automatic focussing laser head BM110 for
fiber cuttng, standard manual laser head for non-metal
Cooling Type Industrial water cooling – S&A water chiller
Moving Speed 40m/min
Acceleration 0.5G
Laser Output Control 0-100% set by software
Drive Method Delta servo motor and ball screw drive system
Positioning Accuracy 0.02mm
Repositioning Accuracy 0.03mm
Minimum line width 0.1mm
Controlling Software Cypcut 2000E software for Fiber laser, Ruida or Lightburn software for CO2 laser control
Graphic Format Supported Graphics files – Ai, DXF, PLT, Gerber, etc.
G code – MaterCam, Type3, Wentai etc.
Compatible Software Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc.
Colour Separation Yes (imports colours to control cutting layers)
Auxiliary Equipment Exhaust Fan, Industrial water cooling unit
Power Supply Machine:
≤1.5kW = 380V 50Hz 32amp (415V filter supplied)
2kW = 380V 50Hz 40amp (415V filter supplied)
Water chiller = 230V 50Hz 20amp
Exhaust fans = 230V 50Hz 10amp
Gas Regulation Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure)
And high pressure N2 and Compressed air electronic regulator (high pressure cu????ng)
Gas Connection O2 (mild steel and copper cuttng) – 4 pack min
Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure
N2 (Stainless, Aluminium, Brass and thin Mild steel cuttng) – 9 pack min
Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure
Compressed air (Stainless, Aluminium, Brass and thin Mild steel cuttng)
Working Environment Temperature: 0-45C, Humidity 5-95% (no condensate water)

Class 1 CE Certified Full Enclosure with Interlocking Sensors

18DHY – 18 bar Air Compressor

Air Compressor for Laser Cutter Australia

20DHY – 20 bar Air Compressor

Air Compressor for Laser Cutter Australia

Light Curtain/Guards Set – Safety Cut Out for Cutting Bed

Light Curtain Safety Barrier System - Protection for Machinery

PA-2000FS-HQ-IQ – 4 Level Filtration Unit with HEPA and Carbon

PA-2000FS-HQ-IQ - 4 Level Filtration Unit with HEPA and Carbon

Gas Attachment Package

2 x 5m Hoses, O2 & N2 Regulators + Standard Gas Pack Connection Type 50/51

Gas Attachment Package - 2*5m hoses and fittings. O2 and N2 regulators with standard gas pack connection Type 50 or 51


See our FAQs page for more information

Have a question or not sure what solution is right for you? Contact us and let us help you today


Contact An Expert

Fill out the form below or call us on (03) 9037 0826


We are committed to delivering your products to your premises as safely as possible. Our service delivers Australia-wide and is dedicated to meeting a variety of shipping needs.

Shipping is calculated based on your location and the weight of the item/s you have chosen to purchase.

Shipping is calculated at checkout, machines are shipped by standard feight. In regards to larger Fiber lasers a member of the Koenig Machinery Service team will contact you to arrange shipping logistics. 

Laser Materials

Standard Click and Collect:

We can have your orders processed for next day pick up.

Express Click and Collect:

If ordered before llam, we will have your materials ready that day for pickup.

Opt for click and collect at checkout.

Secure Payment

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

We accept payments with:

Visa, MasterCard, American Express, Paypal, and more.


If your material is faulty or damaged upon arrival please contact us directly. We will either organize a refund or ship you a replacement.

If it’s determined that the material was damaged on your behalf, you will not qualify for a refund or replacement.

Need Help?


Visit our FAQs page to find answers to common questions.

Customer Support

We are available Monday to Friday.
Call us on (03) 9037 0826


Want to get in touch with our teams? Visit our contact page to send us a message.