LF60M Tube Cutting Fiber

LF60M TUBE FIBER
Tube Fiber Laser - Manual Loading
1kW-6kW

Production Manual Tube Cutting
6m tube cutting capacity as standard (9m available)
20-300mm diameter chuck
FROM $117,100 +GST
 Request a Quote

“The LF60M is our manual loading tube cutting machine. With quick pneumatic clamping design the machine will grab down onto any diameter from 20-300mm without the need to change or adjust the clamping chuck. Fractional automatic supports keep the tube perfectly supported along the length while cutting and the enclosure surrounding the cutting head provide protection for the operator.

The LF60M provides professional cutting of not only standard closed tube profiles as well as I-beam, H-beam, C-channel or custom profiles. Create complex 3D designs, remove the need for welding jigs.As standard the mahcine comes with the Raytools "3D cutting head" with fine tip allowing for cutting into tighter profile corners (internal C-channel and I beam corners). For complex cutting the LF60M is available with 5-axis Raytools GF403 or Germal LT laser head angled cutting (e.g. 45 degree edge cutting).”

Materials and Applications


Profiles –
Round tube, Oval tube, D tube, spure tube, RHS, C-channel, I-beam, H-beam/channel, Angle and custom profiles.

Examples

Features

  • 6500mm tube cutting (350mm min. stock length) standard (9500mm length with 9m model - LF90M)
  • Dual electronic tube clamping and alignment - no manual chuck adjustment required
  • Clamping range 20-300mm
  • Fractional automatic supports along the length of the machine to avoid deformation during cutting (causing cut inaccuracies)
  • Cypcut controller using TubesT Pro professional tube cutting and design software - allowing for all closed and open tube profiles, custom profile design, 3D cut design, array/nesting etc.
  • Cypcut 5000 control system with BCS100 Automatic material tracking system track the capacitance anomalies to predict and avoid collisions and controls the tube support height electronically to improve cutting quality and precision
  • Raytools Automatic focusing “3D” head with fine tip for standard cutting. Raytool or German LT 5-axis laser head available
  • Large Portrait style monitor screen with wireless controller
  • TBI Ball screw drive system
  • Panasonic Servo motors
  • Hiwin guide rails
  • Automatic lubrication system
  • Electronic regulators for all gas connections O2, N2 and compressed air, allowing for fully software-controlled pressure

    Dual Electronic Clamping Design

    Electronic clamping on both sides automatically aligns and centres the tube with a diagonal adjustable range of 20-200mm. It effectively holds the material steady through processing. guanjiachi

    Fractional Automatic Support

    The intelligent tube support system reduces error due to tube deformation. It does this by supporting the length of the tube throughout the cutting process.

    fractional

    Automatic Focussing "3D" Laser Head

    Automatically adjusting the focus lens is ten times faster than manual adjusting, saving you precious time. The software adjusts the focussing lens to determine the most suitable position for different thicknesses of material. "3D" head design has a finer tip for reaching into tighter internal corners.
    Raytool BM111 3D head

    Independent Control Cabinet

    An independent electronics tower houses the electrical components and laser source, with a dustproof design for prolonging their lifespan.

    It also features an automatic thermostat with air conditioning to maintain a constant temperature. This prevents damage when ambient temperatures are high. Air conditione control cabinet for fiber laser cutter
    Technical Parameters Specification
    Laser Power 1-6kW
    Tube Length LF60M - 6m Standard model – up to 6500mm tube length (350mm minimum stock length)
    LF90M - 9m model – up to 9500mm tube length (350mm minimum stock length)
    Tube diameter 20-300mm diameter
    Maximum tube weight 150kg
    Machine Dimensions 12694mm*5345mm*2638m
    Laser source type Raycus or IPG
    Laser Head Type ≤ 3kW = Raytools BM111 3D
    4kW - 6kW = Raytools BM114 3D
    Optional 5-axis Raytools GF403 or German LT
    Cooling Type S&A Industrial Water Cooling
    Cutting Speed 30m/min
    Acceleration 1.5G
    Laser Output Control 0-100% set by software
    Drive method TBI ball screen drive, Panasonic servo motor control with Hiwin guide rails
    Positioning Accuracy 0.03 mm
    Re-positioning accuracy 0.02mm
    Minimum line width 0.1mm
    Controlling Software Cypcut Control System 5000 – sheet cutting, TubesT lite (standard) or TubesT Pro upgrade - tube
    Graphic Format Supported Graphics files – Ai, DXF, PLT, Gerber, etc. G code – MaterCam, Type3, Wentai etc.
    Compatible Software Illustrator, Photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc.
    Colour Separation Yes (imports colours to control cutting layers)
    Auxiliary Equipment Exhaust fan, Industrial water cooling unit
    Power Supply

    Machine: 1kW = 380V 50Hz 20amp (415V filter supplied)
    1.5kW = 380V 50Hz 32amp (415V filter supplied)
    2kW = 380V 50Hz 40amp (415V filter supplied)
    3kW = 380V 50Hz 50amp (415V filter supplied)
    4kW = 380V 50Hz 60amp (415V filter supplied)
    6kW = 380V 50Hz 80amp (415V filter supplied)

    Gas Regulation Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure)
    And high pressure N2 and Compressed air electronic regulator (high pressure cutting)
    Gas Connection O2 (mild steel and copper cuttng) – 4 pack min
       Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure
    N2 (Stainless, Aluminium, Brass and thin Mild steel cuttng) – 9 pack min
       Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure
    Compressed air (Stainless, Aluminium, Brass and thin Mild steel cuttng)
       SEE OUR 18DHY-18Bar or 20DHY-20Bar COMRESSOR OPTIONS
    Working Environment Temperature: 0-45C, Humidity 5-95% (No condensate water)

    18 DHY - 18 bar Air Compressor

    20 DHY - 20 bar Air Compressor (recommended)

    9m Tube Cutting Rotary Mechanism Upgrade

    LF90M Geike tube cutting machine

    5-Axis head - GF403 Raytools

    xx

    Gas Attachment Package

    2 x 5m Hoses, O2 & N2 Regulators + Standard Gas Pack Connection Type 50/51
    Gas Attachment Package - 2*5m hoses and fittings. O2 and N2 regulators with standard gas pack connection Type 50 or 51

    5-axis head - German LT

    WHAT ELSE DO YOU NEED TO KNOW?

    See our FAQs page for more information

    Have a question or not sure what solution is right for you? Contact us and let us help you today

    © 2024 Koenig Machinery. All Rights Reserved.