LF3015GA Pro Enclosed Dual Bed

LF3015GA Pro

LF3015GA Pro
LF3015 GA GWEIKE Koenig Fiber Metal Laser Cutter
LF3015GA-Open-Door-Inside-Fiber-Laser-Cutter
LF3015GA-Inside-View
LF3015GA-Viewing-Camera-Screens
 
 

LF3015GA Pro Fully Enclosed Dual Table Fiber Laser 1-6kW

Industrial Metal Fiber Laser Cutter
3000x1500mm bed 
FROM $97,900 +GST

 Request a Quote

The LF3015GA Pro is our compact enclosed machine with built in electrical cabinet and loading table. Taking up less space on the factory floor and less space for international freight than the LF3015GA, this machine is more affordable than ever before, without compromise on speed, quality, or features. A fully enclosed main table for safety and noise reduction, while the loading table at the rear allows you to load/unload, while cutting continues, greatly increasing your output.

Materials and Applications


MaterialsStainless steel, carbon steel, alloy steel, spring steel, brass, aluminium, gold, silver, titanium plates, etc.

ApplicationsAdvertising boards, outdoor and indoor signs, metal labels, data plates, jewellery and accessories, machinery panels, metal plate structure, machinery components, car panels and components, electric parts, spring sheet, subway and rail line spare parts, homewares, promotional gifts and products, small to large scale prototype design, mechanical hardware, pergola screens and panels, etc.

How Thick Can You Cut? 
Fiber Laser Cutting Thickness Chart

Examples

Features

  • 3000x1500mm fully enclosed machine with loading table
  • Fully enclosed main table, with interlocking safety sensors
  • Compact design with built-in electronic cabinet
  • Built in internal cameras and monitoring screen
  • Cypcut software - Easy to use and compatible with most files
  • Automatic edge seeking/ nesting / fly-cutting etc.
  • BCS100 Automatic material tracking - Follows material surface
    allowing cutting of materials with sight bending or warping
  • Raytools precision automatic focussing laser head
  • Large Portrait style monitor screen
  • Built-in computer, screen, and wireless controller
  • Aviation 3rd generation aluminium gantry - Lightweight/strong
  • Yaskawa motor drive - 1.0G Acceleration
  • YYC rack pinion and gear system
  • French Moto Reducer gear reducer
  • Heavy pallet welded bed - for increased stability and lifetime
  • Automatic lubrication system
  • Ball bearing rollers for loading on the front
  • Drive assembly below the bed on both sides allowing for easy
    loading and offloading
  • Head tracking under-table exhaust system- follows the head
    while cutting for maximum extraction, exhaust fan included
  • Electronic regulators for all gas connections O2, N2 and compressed
    air, allowing for fully software-controlled pressure

Aviation 3rd Generation Aluminium Gantry

The aviation 3rd generation aluminium gantry is manufactured with aerospace standards and formed by 4300 tons press extrusion moulding. After aging treatment, its strength can reach 6061 T6.
Aviation aluminium has many advantages, such as exceptional toughness, corrosion resistance and anti-oxidation.

Segmented Rectangular Tube Welded Bed

Within the internal structure of the bed is a honeycomb structure that is welded with a number of rectangular tubes. Stiffeners are arranged inside the tubes to increase the strength and tensile strength of the bed.

This also increases the resistance and stability of the guide rail to effectively avoid deformation of the bed for 20+ years.Gweike Fiber Laser Segmented Bed

Dual Camera Set Up with Viewing Screen

The dual camera system allows you to monitor both the internal table and the loading table at the front of the machine. The visuals are displayed on a convenient viewing screen located on the exterior.

This allows you to observe multiple sections at one time, giving you peace of mind and improving productivity.

Video Camera to Monitor Fiber Laser Cutter

Compact built in electrical cabinet

Compact enclosed machine with built in electrical Cabinet, allowing for a smaller footprint in your factory and a lower overall cost due to smaller international shipping footprint. 


Automatic Loading and Unloading Device - Single Machine

Sheet Storage Tower + Automatic Loading and Unloading

Automatic Nozzle Exchanger - 8 Nozzle Holder and Exchanger

18DHY - 18 bar Air Compressor

20DHY - 20 bar Air Compressor

PA-5000SA - Self Flushing Laser Fume Extractor

Sheet Storage - Additional Raw Material Level

Gas Attachment Package including Hoses, Fittings and O2/N2 Regulators

CypNest Software Upgrade for Advanced Nesting Capabilities

CypNest Software Upgrade Logo for advanced nesting capabilities
Technical Parameters Specification
Laser Power 1-6kW
Bed size 3000 x 1500mm with dual loading bed
(also available in 4000x1500mm, 4000x2000mm)
Machine Size  8586*2280*2429mm
Laser source type Raycus or IPG
Laser Head Type Raytools automa􀆟c focussing laser head
≤ 3kW = BM111
4kW - 6kW = BM114
Cooling Type Industrial water cooling - S&A water chiller
Moving Speed 80m/min
Acceleration 1.0 G
0-100% set by software
Drive method YYC Rack and pinion system, Moto reducer gear
reducer with Yaskawa motor drive
Positioning Accuracy 0.03 mm
Re-positioning accuracy 0.02mm
Minimum line width 0.1mm
Controlling Software Cypcut Control System 2000E, including nes􀆟ng, edge seeking and automa􀆟c crash protec􀆟on
Graphic Format Supported Graphics files – Ai, DXF, PLT, Gerber, etc. G code – MaterCam, Type3, Wentai etc.
Compatible Software Illustrator, Photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc.
Colour Separation Yes (imports colours to control cutting layers)
Auxiliary Equipment Exhaust fan, Industrial water cooling unit
Power Supply 380V 50Hz (Amps dependent on laser power)
415V – 380V filter supplied
Gas Regulation So􀅌ware controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure)
And high pressure N2 and Compressed air electronic regulator (high pressure cu􀆫ng)
Gas Connection O2 (mild steel and copper cu􀆫ng) – 4 pack min
Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure
N2 (Stainless, Aluminium, Brass and thin Mild steel cu􀆫ng) – 9 pack min
Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure
Compressed air (Stainless, Aluminium, Brass and thin Mild steel cu􀆫ng)
SEE OUR 18DHY-18Bar or 20DHY-20Bar COMRESSOR OPTIONS
Working Environment Temperature: 0-45C, Humidity 5-95% (no condensate water)

WHAT ELSE DO YOU NEED TO KNOW?

See our FAQs page for more information

Have a question or not sure what solution is right for you? Contact us and let us help you today

© 2024 Koenig Machinery. All Rights Reserved.