KM1309FC/KM1313FC Fiber CO2 Combination machine

KM1309FC Fiber CO2 combination Koengi Machinery
Wireless Controller for Metal Laser Cutter
Fiber Laser Cutter Lens
Metal Laser Cutter Head

KM1309FC/KM1313FC 
Enclosed Fiber/CO2 Combination Machine
Fiber Power: 1-2kW
CO2 Laser : 280W Joy Laser

Metal/Non-Metal Fiber/CO2 Laser Cutter
1300x900 or 1300x1300mm bed
FROM $91,250 +GST

Request a Quote

The KM1390FC is a fully enclosed combination fiber and CO2 laser machine, designed for the best cutting quality for both metal and non-metal materials. Perfect for education and business use, it is suitable for cutting thin sheet metals such as carbon, stainless steel etc., while also allowing for cutting of plastics, woods foam fabric etc. The 1300x1300mm bed size (half sheet), will allow for an even larger cut, while still providing a small overall footprint. Designed for precision cutting this machine is full enclosure with CE certified protection safety glass.


This fiber laser machine uses a TBI ground ball screw drive for extremely high precision and reliability alongside a Japanese Panasonic servo motor drive and German Schneider Electronics. 

Materials and Applications

CAPACITY:
CO2:
With 280W - Cut up to 25mm Wood/Ply/Bamboo/MDF, 30mm Acrylics, Perspex, laminates etc.
Also cutting leather, paper, cardboard, rubber (stamps), foam, felt, fabric, etc.

FIBER:
1kW - Up to 10mm Mild Steel, 5mm Stainless Steel, 3mm Aluminium, 2mm Brass
1.5kW - Up to 14mm Mild Steel, 7mm Stainless Steel, 5mm Aluminium, 3mm Brass
2kW - Up to 18mm Mild Steel, 9mm Stainless Steel, 8mm Aluminium, 5mm Brass
NOTE: IPG laser source required for aluminium, Brass and other non-ferrous metal cutting.

How Thick Can You Cut with a Fiber Laser?



Examples

Features

  • Combination metal/non-metal cutting with huge 280W CO2
  • 1300x900mm or 1300x1300mm bed with full enclosure
  • Removable access door at the rear for loading full sized sheets
    (Use the machine to cut down larger stock before processing)
  • Large Viewing window with bright internal lighting• Cypcut
    software - Easy to use and compatible with most files
  • Automatic edge seeking
  • BCS100 Automatic material tracking - Follows material surface
    allowing cutting of materials with sight bending or warping
  • Raytools precision automatic focussing laser head -metal cutting
  • Positioning and re-positioning accuracy 0.03mm
  • Large Portrait monitor, built-in computer, and wireless controller
  • Aviation 3rd generation aluminium gantry - Lightweight/strong
  • Delta servo motor drive
  • Dual TBI ground ball screw drive - Extremely high precision and
    supported on 2 both sides
  • HIWIN guide rails
  • BCS100 Automatic material tracking - Follows material surface
    allowing cutting of materials with sight bending or warping
  • Ball bearing rollers for loading on the front and right side
  • Protective cover for drive system
  • Industrial S&A water cooling unit
  • Under table exhaust system, high pressure exhaust fan included
  • Electronic regulators for all gas connections O2, N2 and
    compressed air, allowing for fully software controlled pressure

Raytools Automatic Focussing Fiber Laser Head

The software adjusts the focussing lens to determine the most suitable position for different thicknesses of material. Automatically adjusting the focus lens is ten times faster than manually adjusting, saving you precious time.

Raytools Autofocus Head

Fully Enclosed Design

CE standard safety glass offers protection whilst still being able to view your workpiece.

The enclosed design also means that any smoke produced is contained inside the machine, ready to be filtered and removed via the exhaust.

Dual Rail & Dual Driver Design

The Y-axis on both sides are equipped with two guide rails to prevent cutting line deformation that could be caused by the Y-axis screw bending.

The double ball drive screw ensures straightness and arc degree during high-speed cuts.

 Dual Driver and Dual Driver Design | Fiber Laser for Cutting Thin Sheet Metal

Aviation 3rd Generation Aluminium Gantry

The Aviation 3rd generation aluminium gantry is manufactured with aerospace standards and formed by 4300 tons press extrusion moulding. After aging treatment, its strength can reach 6061 T6.

Aviation aluminium has many advantages, such as exceptional toughness, corrosion resistance and anti-oxidation. 3rd Generation Aluminium Gantry | Fiber Laser for Cutting Metal

Superior Cutting Precision

Automatic edge seeking works to improve your productivity and efficiency by tracking the workpiece and measuring where the edge is located. This ensures you do not have to keep moving and readjusting heavy materials.

Automatic material tracking is ideal for accommodating materials with slight bending or warping because it follows the surface and calculates differences.
Technical Parameters Specification
Laser Power 1kW - 2kW
Bed Size 1300 x 1300mm
Machine Size 2110(W) x 2460 (D) x 1630(H)mm

(Approx.) Required Working Footprint

2900(W) x 3100(D) x 1700(H)mm
Laser Source Type IPG laser source (Raycus available)
Laser Head Type Raytools automatic focussing laser head
≤1.5kW = BM109
2kW = BM111
Cooling Type Industrial water cooling - S&A chiller
Moving Speed 40m/min
Acceleration 0.5G
Laser Output Control 0-100% set by software
Drive Method

Japanese Panasonic servo motor and ball screw drive system

Positioning Accuracy 0.008 mm
Re-Positioning Accuracy 0.02mm
Minimum Line Width 0.1mm
Controlling Software Cypcut Control System 2000s, including nesting, edge seeking and automatic crash protection
Graphic Format Supported Graphics files – Ai, DXF, PLT, Gerber, etc. G code – MaterCam, Type3, Wentai etc.
Compatible Software Illustrator, Photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc.
Auxiliary Equipment Exhaust fan, Industrial water cooling unit
Power Supply  Machine:
1kW = 380V 50Hz 20amp (415V filter supplied)
1.5kW = 380V 50Hz 32amp (415V filter supplied)
2kW = 380V 50Hz 40amp (415V filter supplied)
Water chiller = 230V 50Hz 20amp
Exhaust fans = 230V 50Hz 10amp
Working Environment Temperature:0-45C, Humidity 5-95% (No condensate water)

18DHY - 18 bar Air Compressor

Air Compressor for Laser Cutter Australia

20DHY - 20 bar Air Compressor

Air Compressor for Laser Cutter Australia

PA-2400SA Laser Fume Extractor

Laser Fume Extractor for Machinery

CypNest Software Upgrade for Advanced Nesting Capabilities

Gas Attachment Package

2 x 5m Hoses, O2 & N2 Regulators + Standard Gas Pack Connection Type 50/51
Gas Attachment Package - 2*5m hoses and fittings. O2 and N2 regulators with standard gas pack connection Type 50 or 51

WHAT ELSE DO YOU NEED TO KNOW?

 

See our FAQs page for more information

 

Have a question or not sure what solution is right for you? Contact us and let us help you today

 
© 2024 Koenig Machinery. All Rights Reserved.