FEATURES

With a choice between 150W or 280W power the K1325M metal and non-metal laser cutting machine provides high speed, high power cutting.

The 150W allows you to cut up to 18mm acrylic and 20mm mdf/ply in one pass and up to 1.5mm mild steel and 1mm stainless steel. The 280W allows you to cut up to 30mm acrylic and 25mm mdf/ply in one pass and up to 2.5mm mild steel and 2mm stainless steel. With the 280W you'll also be able to cut standard thinner materials (e.g. 3mm acrylic) at up to twice the speed of a standard 150W machine, reducing production time by up to 50%!

With our surface tracking laser head, cutting metal is a breeze. The head will track the metal surface accurately over warps or bends, providing consistent cutting and gas pressure.

This open industrial unit allows for full size sheet cutting. Using materials in their full sheet form saves on cutting cost and time whilst also reducing operator work-load.

Ball rollers at the front and rear of the machine provide a sliding surface for loading and un-loading sheet materials. Sheets can be loaded easily by one operator (depending on weight) without scratching or damaging materials.

The precision ball screw drive provides higher accuracy cutting and engraving when compared to standard belt drive systems. The higher acceleration and deceleration that this machine offers is particularly important for metal cutting because it ensures consistency of cutting depth and smoother travel for a cleaner edge.

There is a conical table with under table extraction connection, for better quality extraction. The conical shape also helps to capture parts or offcuts and channel them into the clean-up drawer

LED internal lighting allows you to easily view your workpiece by looking through the protective lid.

Our S&A CW6000 water chiller is included with both the 150W and 280W machine. A standard compressor and extraction fan are also included. Ask us about our software integrated high-powered compressor option for optimal quality clean cutting, and our air filtration units for filtering all particles and fumes from the air (recommended for office and at home machine set-up).

We now provide both RDworks and Lightburn Software with your machine. RDworks is compatible with PC and Lightburn is compatible with both PC and MAC OS computers allowing you to have a streamlined design process. The Lightburn software package features easy, intuitive functionality. Click here to trial the Lightburn software

Our K1325M machine has been designed with a solid welded chasis frame. Please review the dimensions of the machine and consider access from the front or back of the machine if loading using the ball bearing assistance. Please note a forkilft will be required on site for offload during delivery.

WHY CHOOSE KOENIG?

- Dedicated Australian technical support, with local on-site technician for set-up or when required.

- FREE lifetime technical support for the lifetime of the machine over the phone, email or remote computer access (on-site service available)

- 1 year Warranty covering all machine parts + 9 month laser tube warranty.

Technical Parameters Specification
Laser Power 150W (280W available)
Cutting Area 1300 x 2500mm (1500 x 3000mm available)
Z Axis Static table, 40mm max cut
Laser Type Yongli laser tube 10.6μm – up to 10,000 hour life
Machine Footprint (total size) 1850(W) x 3600(D) x 1300(H)mm
Machine Weight 1500kg
Table Type Saw tooth knife bed table included (optional honeycomb table available)
Motor Type Precision Stepper Motor
Drive Type Taiwan TBI ball screw drive – High precision drive system
Ventilation Fan and extraction hosing provided (4 stage air filters optional)
Cooling Type S&A CW6000 enclosed water chilling unit included
Engraving Speed Up to 100mm/s – not recommended for regular engraving
Cutting Speed Up to 300mm/s
Min. Engraving Size 1.0mm*1.0mm
Locating Accuracy ≤+0.05mm
Controlling Software DSP Control System
Software RDworks or Lightburn
Computer Compatibility Windows (32 or 64-bit)
Graphic Format Supported DXF DWG AI PDF DST PLT BMP JPG PNG etc.
Machine file memory 128MB internal memory (up to 100 files)
Power Supply 230V 50Hz 15amp

WHAT CAN YOU DO WITH THE K1325M CO2 LASER MACHINE?

150W - Cut up to 20mm wood, ply, bamboo, MDF, natural hardwoods (dependent on glue and density). Cut up to 18mm acrylics, perspex and wood laminates. Cut up to 1.5mm mild steel and 1mm stainless steel. Cut leather, paper, cardboard, rubber (stamps), foam, polyester and etch/mark all the above including glass, stone and chemically mark metal.

280W - Cut up to 25mm wood, ply, bamboo, MDF, natural hard woods (dependent on glue and density). Cut up to 30mm acrylics, perspex and wood laminates. Cut up to 2.5mm mild steel and 2mm stainless steel. Cut leather, paper, cardboard, rubber (stamps), foam, polyester and etch/mark all the above including glass, stone and chemically mark metal.

For High powered machines 150W and above, photographic etching is not recommended. For fine detailed and photographic etching, 40-100W power is recommended.

K1309M_cutting_parameters

EXAMPLES

1325M_sample_2
1325M_sample_3
1325M_sample_1
1325M_sample_4
1325M_sample_5
website_image_12
1309mhome

Honeycomb Table

image3

High Powered Quiet Compressor

Highpowerquit

Downward blowing system

Downward

Digital control Pure air filtration unit

image6

WHAT ELSE DO YOU NEED TO KNOW?

What about support? At Koenig Machinery we pride ourselves on the quality of our after sales service and support. We are here to see you succeed and help you along the way. This might be in the form of a service call or simply a quick chat to help you find the right settings for your material. Whatever you need: We're here to support you with ongoing free phone and email support for the life of your machine.

Are you looking for finance? We have several finance options that we can offer and we are happy to work with your existing financial brokers. Give us a call today for more information and pricing options.

How does set up and delivery work? Contact us with your postcode and we will be able to give you an accurate quote for shipping and installation at your premises. Installation by one of our highly trained technicians is recommended, however if you are in a rural area and want to look at setting up the machine yourself, you can do this as well. We have videos and guides to help you through the installation process.

Where can I buy the acrylic and materials? Have a look at our shop! We sell a wide range of standard colour acrylic, pastel acrylic, glitter acrylic and pearl acrylic. We also stock plywood, bamboo and consumables such as application tape, double sided tape, CerMark spray for metal marking and much more. Check out the Koenig Shop here.

See our FAQs page for more information

Have a question or not sure what solution is right for you? Contact us and let us help you today

© 2022 Koenig Machinery. All Rights Reserved.