- CO2 Lasers
- Fiber Lasers
- Fiber Markers
- xTool Lasers
- Laser Material Shop
Thickness
- UV Printers
- Press Brakes
- Learn
Who we are
How It Works
The LF60ML is semi-automatic loading tube cutting machine, with conveyor platform the operator loads tube manually in a row, then the intelligent automation system will select one tube at a time, docking the tube into the clamping chuck. The finished product is automatically dropped to the storage bin. This loading solution will save greatly on set-up and production time, heavily decreasing the manpower required for production. Recommended for heavy and open profile tube (such as C-channel, I-beam etc)
The LF60MS is our automatic loading tube cutting machine with intelligent material separation, feeding and seamless docking the tube into the clamping chuck. Load full bundles of tubes into the feeding device and the machine will load 1 at a time until the pack is finished. The finished product is automatically dropped to the storage bin. This loading solution will save greatly on set-up and production time, heavily decreasing the manpower required for production.
Automatic loading device, designed to accurately grab 1 tube at a time and automatically load and clamp into the front and rear chuck of the machine. Load packs up to a huge 2500kg, allowing the software to control the cutting process through multiple tubes or full packs at a time.
The LF60ML is semi-automatic loading tube cutting machine, with conveyor platform the operator loads tube manually in a row, then the intelligent automation system will select one tube at a time, docking the tube into the clamping chuck. The finished product is automatically dropped to the storage bin. This loading solution will save greatly on set-up and production time, heavily decreasing the manpower required for production. Recommended for heavy and open profile tube (such as C-channel, I-beam etc)
Up to 7m tube stock with model LF60MS (10m stock length LF90MS, 12.5m stock length with LF120MS)
Semi automatic loading system – Load the conveyor feeder with your tube stock, the inteligent loading system will load 1 tube at a time into the machine chuck
Automatic unloading – dropping the tube into a collection bin
Dual electronic tube clamping- no manual chuck adjustment
Clamping range 20-240mm standard (20-280mm Chuck or 20-360mm chuck upgrade available)
Fractional automatic supports along the length of the machine to avoid deformation during cutting
Cypcut controller using TubesT Pro professional tube cutting and design software – allowing for all closed and open tube profiles, custom profile design, 3D cut design, nesting etc
Cypcut 5000 control system with BCS100 Automatic material tracking system
BOCI or Raytools precision automatic focussing laser head with fine 3D tip (5-axis options available)
Large Portrait style monitor screen with wireless controller
TBI Ball screw drive system, Panasonic Servo motors
Hiwin guide rails and automatic lubrication system
Electronic regulators for all gas connections O2, N2 and compressed air, allowing for fully software-controlled pressure
| Technical Parameters | Specification |
| Laser Power | 1kW, 1.5kW, 2kW, 3kW, 4kW, 6kW |
| Tube Length | LF60MS – 6m Standard model – up to 7m tube length (100mm min end piece) LF90MS – 9m model – up to 10mmm tube length (100mm min end piece) LF120MS – 12m model – up to 12.5mmm tube length (100mm min end piece) |
| Clamp Diameter | 20-240mm diameter (20-280, 20-360 upgrade available) |
| Tube weight capacity | 240mm chuck = 500kg, 280mm chuck = 400kg, 360mm chuck = 500kg |
| Outfeed Table | 3m as standard (extendable options in 1.5m and 3m lengths) |
| Machine Size | LF60MS – 11900mm*1880mm*2260m LF90MS – 14900mm*1880mm*2260m LF120MS – 17900mm*1880mm*2260m |
| Laser source type | MAX, Raycus or IPG |
| Laser Head Type | Automatic focussing laser head with “3D” fine tip 1-2kW = Raytools BM111 3kW = BOCI BLT421 4-6kW = BOCI BLT441 (5 axis head options available – Raytools/BOCI or German LT) |
| Cooling Type | Industrial Water Cooling – S&A water chiller |
| Moving Speed | 30m/min |
| Acceleration | 1.5G |
| Laser Output Control | 0-100% set by software |
| Drive method | TBI ball screen drive, Panasonic servo motor control with Hiwin guide rails |
| Positioning Accuracy | 0.03 mm |
| Re-positioning accuracy | 0.02mm |
| Minimum line width | 0.1mm |
| Controlling Software | Cypcut Control System 5000 – sheet cutting, TubesT lite (standard) or TubesT Pro upgrade – tube |
| Graphic Format Supported | Graphics files – Ai, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc. |
| Compatible Software | Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc. |
| Colour Separation | Yes (imports colours to control cutting layers) |
| Auxiliary Equipment | Exhaust Fan, Industrial water-cooling unit |
| Power Supply | Machine:
1kW = 415V 50Hz 20amp 1.5kW = 415V 50Hz 32amp 2kW = 415V 50Hz 50amp 3kW = 415V 50Hz 50amp 4kW = 415V 50Hz 60amp 6kW = 415V 50Hz 63amp |
| Gas Regulation | Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure)
And high pressure N2 and Compressed air electronic regulator (high pressure cutting) |
| Gas connection | O2 (mild steel and copper cutting) – 4 pack min
Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure N2 (Stainless, Aluminium, Brass and thin Mild steel cutting) – 9 pack min Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure Compressed air (Stainless, Aluminium, Brass and thin Mild steel cutting) SEE OUR 18DHY-18Bar or 20DHY-20Bar COMPRESSOR OPTIONS |
| Working Environment | Temperature:0-45C, Humidity 5-95% (No Condensate Water) |
| Technical Parameters | Specification |
| Laser Power | 1kW, 1.5kW, 2kW, 3kW, 4kW, 6kW |
| Tube Length | LF60MS – 6m Standard model – up to 6500mm tube length (350mm minimum stock length) LF90MS – 9m model – up to 9500mm tube length (350mm minimum stock length) |
| Clamp Diameter | 20-240mm diameter (20-280, 20-360 upgrade available) |
| Tube weight capacity | 240mm chuck = 500kg, 280mm chuck = 400kg, 550mm chuck = 500kg |
| Maximum pack load weight | 2500kg |
| Machine Size | LF60MA – 12694mm*5345mm*2638m LF90MA – 15694mm*5345mm*2638m |
| Laser source type | Raycus or IPG |
| Laser Head Type | Raytools automatic focussing “3D” laser head ≤3kW = BM111 4kW = BD04K 6kW = BD08K (5 axis head options available – Raytools GF40 or German LT) |
| Cooling Type | Industrial Water Cooling – S&A water chiller |
| Moving Speed | 30m/min |
| Acceleration | 1.5G |
| Laser Output Control | 0-100% set by software |
| Drive method | TBI ball screen drive, Panasonic servo motor control with Hiwin guide rails |
| Positioning Accuracy | 0.03 mm |
| Re-positioning accuracy | 0.02mm |
| Minimum line width | 0.1mm |
| Controlling Software | Cypcut Control System 5000 – sheet cutting, TubesT lite (standard) or TubesT Pro upgrade – tube |
| Graphic Format Supported | Graphics files – Ai, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc. |
| Compatible Software | Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc. |
| Colour Separation | Yes (imports colours to control cutting layers) |
| Auxiliary Equipment | Exhaust Fan, Industrial water-cooling unit |
| Power Supply | Machine: 1kW = 415V 50Hz 20amp 1.5kW = 415V 50Hz 32amp 2kW = 415V 50Hz 50amp 3kW = 415V 50Hz 50amp 4kW = 415V 50Hz 60amp 6kW = 415V 50Hz 63amp |
| Gas Regulation | Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure) And high pressure N2 and Compressed air electronic regulator (high pressure cutting) |
| Gas Connection | O2 (mild steel and copper cutting) – 4 pack min Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure N2 (Stainless, Aluminium, Brass and thin Mild steel cutting) – 9 pack min Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure Compressed air (Stainless, Aluminium, Brass and thin Mild steel cutting) SEE OUR 18DHY-18Bar or 20DHY-20Bar COMRESSOR OPTIONS |
| Working Environment | Temperature:0-45C, Humidity 5-95% (No Condensate Water) |
Prompt and efficient delivery
Onsite or over the phone support
Your payment information is processed securely
Machine Sale Enquires sales@koenigmachinery.com.au Material Shop Order Enquires admin@koenigmachinery.com.au Machine Troubleshooting service@koenigmachinery.com.au
Unit 10, 242D New Line Road Dural NSW 2158 Australia
4/23 Ford Rd, Coomera QLD 4209 Australia
