Search
Close this search box.
Search
Close this search box.

Gweike LF60MA Tube Cutter – Automatic Loading

Full Pack Tube Cutting Fiber Laser 1-6kW

The LF60MA is our automatic loading tube cutting machine with intelligent material separation, feeding and seamless docking the tube into the clamping chuck. Load full bundles of tubes into the feeding device and the machine will load 1 at a time until the pack is finished. The finished product is automatically dropped to the storage bin. This loading solution will save greatly on set-up and production time, heavily decreasing the manpower required for production. Load packs up to a huge 2500kg, the software will control the cutting process through multiple tubes or full packs at a time.

From $195,500 *ex GST

Gweike LF60MA Tube Cutter – Automatic Loading

Full Pack Tube Cutting Fiber Laser 1-6kW

From $195,500 *ex GST

The LF60MA is our automatic loading tube cutting machine with intelligent material separation, feeding and seamless docking the tube into the clamping chuck. Load full bundles of tubes into the feeding device and the machine will load 1 at a time until the pack is finished. The finished product is automatically dropped to the storage bin. This loading solution will save greatly on set-up and production time, heavily decreasing the manpower required for production.

The LF60MA is our automatic loading tube cutting machine with intelligent material separation, feeding and seamless docking the tube into the clamping chuck. Load full bundles of tubes into the feeding device and the machine will load 1 at a time until the pack is finished. The finished product is automatically dropped to the storage bin. This loading solution will save greatly on set-up and production time, heavily decreasing the manpower required for production. Load packs up to a huge 2500kg, the software will control the cutting process through multiple tubes or full packs at a time.

Up to 7m tube stock with model LF60MA (10m stock length LF90MA, 12.5m stock length with LF120MA)

Automatic loading from a full pack -1 tube at a time, continuing to cut until required cutting schedule or pack is completed

Small end piece requirement – 100mm

Automatic unloading – dropping the tube into a collection bin

Dual electronic tube clamping- no manual chuck adjustment

Clamping range 20-240mm standard (20-280mm Chuck or 20-360mm chuck upgrade available)

Cypcut controller using TubesT Pro professional tube cutting and design software

Cypcut 5000 control system with BCS100 Automatic material tracking system

BOCI or Raytools precision automatic focussing laser head with fine 3D tip (5-axis options available)

Large Portrait style monitor screen with wireless controller

TBI Ball screw drive system, Panasonic Servo motors

Hiwin guide rails and automatic lubrication system

Automatic lubrication system

Panasonic Servo motors

Fractional automatic supports along the length of the machine to avoid deformation during cutting (servo-controlled option available for longer weaker profiles such as bar and angle iron)

Electronic regulators for all gas connections O2, N2 and compressed air, allowing for fully software-controlled pressure

Materials and Applications

Profiles – Round tube, Oval tube, D tube, spure tube, RHS, C-channel, I-beam, H-beam/channel, Angle and custom profiles. 

Examples

Gweike LF60MA Tube Cutter – Automatic Loading

Technical Parameters Specification
Laser Power 1kW, 1.5kW, 2kW, 3kW, 4kW, 6kW
Tube Length LF60MA – 6m Standard model – up to 7m tube length (100mm min end piece)
LF90MA – 9m model – up to 10mmm tube length (100mm min end piece)
LF120MA – 12m model – up to 12.5mmm tube length (100mm min end piece)
Minimum waste stock length 100mm
Clamp Diameter 20-240mm standard (20-280mm Chuck or 20-360mm chuck upgrade available)
Maximum pack load weight 2500kg
Tube weight capacity 240mm chuck = 500kg, 280mm chuck = 400kg, 360mm chuck = 500kg
Machine Size 12694mm*5345mm*2638m
Laser source type MAX, Raycus or IPG
Laser Head Type Automatic focussing laser head with “3D” fine tip
1-2kW = Raytools BM111
3kW = BOCI BLT421
4-6kW = BOCI BLT441
(5 axis head options available – Raytools/BOCI or German LT)
Cooling Type Industrial Water Cooling – S&A water chiller
Moving Speed 30m/min
Acceleration 1.5G
Laser Output Control 0-100% set by software
Drive method TBI ball screen drive, Panasonic servo motor control with Hiwin guide rails
Positioning Accuracy 0.03 mm
Re-positioning accuracy 0.02mm
Minimum line width 0.1mm
Controlling Software Cypcut Control System 5000 – sheet cutting, TubesT lite (standard) or TubesT Pro upgrade – tube
Graphic Format Supported Graphics files – Ai, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc.
Compatible Software Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc. 
Colour Separation Yes (imports colours to control cutting layers)
Auxiliary Equipment Exhaust Fan, Industrial water-cooling unit 
Power Supply Machine:

1kW = 415V 50Hz 20amp 

1.5kW = 415V 50Hz 32amp 

2kW = 415V 50Hz 50amp 

3kW = 415V 50Hz 50amp 

4kW = 415V 50Hz 60amp 

6kW = 415V 50Hz 63amp

Gas Regulation Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure)

And high pressure N2 and Compressed air electronic regulator (high pressure cutting)

Gas connection O2 (mild steel and copper cutting) – 4 pack min

   Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure

N2 (Stainless, Aluminium, Brass and thin Mild steel cutting) – 9 pack min

   Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure

Compressed air (Stainless, Aluminium, Brass and thin Mild steel cutting)

SEE OUR 18DHY-18Bar or 20DHY-20Bar COMPRESSOR OPTIONS

Working Environment Temperature:0-45C, Humidity 5-95% (No Condensate Water)
Technical PowerSpecification
Laser Power1kW, 1.5kW, 2kW, 3kW, 4kW, 6kW
Tube Length LF60MA – 6m Standard model – up to 6500mm tube length (350mm minimum stock length) LF90MA – 9m model – up to 9500mm tube length (350mm minimum stock length)
Minimum waste stock length 100mm
Clamp Diameter20-240mm standard (20-280mm Chuck or 20-360mm chuck upgrade available)
Maximum pack load weight2500kg
Tube weight capacity240mm chuck = 500kg, 280mm chuck = 400kg, 550mm chuck = 500kg
Machine Size12694mm*5345mm*2638m
Laser source type Raycus or IPG
Laser Head Type Raytools automatic focussing fine tipped “3D” laser head ≤3kW = BM111 4kW = BD04K 6kW = BD08K (5 axis head options available – Raytools GF40 or German LT)
Cooling Type Industrial Water Cooling – S&A water chiller
Cutting Speed30m/min
Acceleration1.5G
Moving Speed30m/min
Laser Output Control 0-100% set by software
Drive method TBI ball screen drive, Panasonic servo motor control with Hiwin guide rails
Positioning Accuracy 0.03 mm
Re-positioning accuracy 0.02mm
Minimum line width 0.1mm
Controlling Software Cypcut Control System 5000 – sheet cutting, TubesT lite (standard) or TubesT Pro upgrade – tube
Graphic Format Supported Graphics files – Ai, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc.
Compatible Software Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc.
Colour Separation Yes (imports colours to control cutting layers)
Auxiliary Equipment Exhaust Fan, Industrial water-cooling unit
Power Supply Machine: 1kW = 415V 50Hz 20amp 1.5kW = 415V 50Hz 32amp 2kW = 415V 50Hz 50amp 3kW = 415V 50Hz 50amp 4kW = 415V 50Hz 60amp 6kW = 415V 50Hz 63amp
Gas Regulation Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure) And high pressure N2 and Compressed air electronic regulator (high pressure cutting)
Gas ConnectionO2 (mild steel and copper cutting) – 4 pack min Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure N2 (Stainless, Aluminium, Brass and thin Mild steel cutting) – 9 pack min Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure Compressed air (Stainless, Aluminium, Brass and thin Mild steel cutting) SEE OUR 18DHY-18Bar or 20DHY-20Bar COMRESSOR OPTIONS
Working Environment Temperature:0-45C, Humidity 5-95% (No Condensate Water)

Fiber Laser LF60MA Product Catalogue

Customise Your Laser Machine

Laser Source
Choose Power (NOTE: For Aluminium Brass and copper choose any power in IPG, 3/6kW in MAX or 6kW in Raycus)
Laser Head
Choose your laser head
Compressor
Choose Optional Compressor
Air Filter
Choose Optional Air Filter
Other
Other Optional Options
Light Curtain Safety System
$2,800.00
Gas attachment pack
$2,950.00
Tube Length
Choose Tube Length
Tube Diameter
Choose Tube Diameter

Related Products