- CO2 Lasers
- Fiber Lasers
- Fiber Markers
- xTool Lasers
- Laser Material Shop
Thickness
- UV Printers
- Press Brakes
- Learn
Who we are
How It Works
The LF60M is our manual loading tube cutting machine. With quick pneumatic clamping design the machine will grab down onto any diameter from 20-240mm (with options up to 280mm or 360mm) without the need to change or adjust the clamping chuck. Fractional automatic supports keep the tube perfectly supported along the length while cutting and the enclosure surrounding the cutting head provide protection for the operator.
Professional cutting of not only standard closed tube profiles, but any I-beam, H-beam, C-channel or custom profiles. Create complex 3D designs, remove the need for complex welding jigs. 5-axis heads available for 45 degree and bevel cutting.
The LF60M is our manual loading tube cutting machine. With quick pneumatic clamping design the machine will grab down onto any diameter from 20-240mm (with options up to 280mm or 360mm) without the need to change or adjust the clamping chuck. Fractional automatic supports keep the tube perfectly supported along the length while cutting and the enclosure surrounding the cutting head provide protection for the operator.
The LF60M is our manual loading tube cutting machine. With quick pneumatic clamping design the machine will grab down onto any diameter from 20-240mm (with options up to 280mm or 360mm) without the need to change or adjust the clamping chuck. Fractional automatic supports keep the tube perfectly supported along the length while cutting and the enclosure surrounding the cutting head provide protection for the operator.
Professional cutting of not only standard closed tube profiles, but any I-beam, H-beam, C-channel or custom profiles. Create complex 3D designs, remove the need for complex welding jigs. 5-axis heads available for 45 degree and bevel cutting.
Up to 7m tube stock with model LF60M (10m stock length LF90M, 12.5m stock length with LF120M)
Small end piece requirement – 100mm
Dual electronic tube clamping and alignment – no manual chuck adjustment required
Clamping range 20-240mm standard (20-280mm Chuck or 20-360mm chuck upgrade available)
Fractional automatic supports along the length of the machine to avoid deformation during cutting (servo-controlled option available for longer weaker profiles such as bar and angle iron)
Cypcut controller using TubesT Pro professional tube cutting and design software – allowing for all closed and open tube profiles, custom profile design, 3D cut design, nesting etc.
Cypcut 5000 control system with BCS100 Automatic material tracking system, predict and avoid collisions and controls the tube support height electronically
BOCI or Raytools precision automatic focussing laser head with fine 3D tip (5-axis options available)
Large Portrait style monitor screen with wireless controller
TBI Ball screw drive system, Panasonic Servo motors
Hiwin guide rails and automatic lubrication system
Panasonic Servo motors
Automatic lubrication system
Electronic regulators for all gas connections O2, N2 and compressed air, allowing for fully software-controlled pressure
| Technical Parameters | Specification |
| Laser Power | 1kW, 1.5kW, 2kW, 3kW, 4kW, 6kW |
| Tube Length | LF60M – 6m Standard model – up to 7m tube length (100mm min end piece) LF90M – 9m model – up to 10m tube length (100mm min end piece) LF90M – 9m model – up to 12.5m tube length (100mm min end piece) |
| Minimum waste stock length | 100mm |
| Clamp Diameter | 20-240mm standard (20-280mm Chuck or 20-360mm chuck upgrade available) |
| Tube weight capacity | 240mm chuck = 500kg, 280mm chuck = 400kg, 360mm chuck = 500kg |
| Machine Size | LF60M – 12450mm*19190mm *2515m (including collection draw) LF90M – 15454mm*19190mm*2515m (including collection draw) LF120M – 15454mm*19190mm*2515m (including collection draw) |
| Laser source type | MAX, Raycus or IPG |
| Laser Head Type | Automatic focussing laser head with “3D” fine tip 1-2kW = Raytools BM111 3kW = BOCI BLT421 4-6kW = BOCI BLT441 (5 axis head options available – Raytools/BOCI or German LT) |
| Cooling Type | Industrial Water Cooling – S&A water chiller |
| Moving Speed | 30m/min |
| Acceleration | 1.5G |
| Laser Output Control | 0-100% set by software |
| Drive method | TBI ball screen drive, Panasonic servo motor control with Hiwin guide rails |
| Positioning Accuracy | 0.03 mm |
| Re-positioning accuracy | 0.02mm |
| Minimum line width | 0.1mm |
| Controlling Software | Cypcut Control System 5000 – sheet cutting, TubesT lite (standard) or TubesT Pro upgrade – tube |
| Graphic Format Supported | Graphics files – Ai, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc. |
| Compatible Software | Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc. |
| Colour Separation | Yes (imports colours to control cutting layers) |
| Auxiliary Equipment | Exhaust Fan, Industrial water-cooling unit |
| Power Supply | Machine:
1kW = 415V 50Hz 20amp 1.5kW = 415V 50Hz 32amp 2kW = 415V 50Hz 50amp 3kW = 415V 50Hz 50amp 4kW = 415V 50Hz 60amp 6kW = 415V 50Hz 63amp |
| Gas Regulation | Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure)
And high pressure N2 and Compressed air electronic regulator (high pressure cutting) |
| Gas connection | O2 (mild steel and copper cutting) – 4 pack min
Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure N2 (Stainless, Aluminium, Brass and thin Mild steel cutting) – 9 pack min Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure Compressed air (Stainless, Aluminium, Brass and thin Mild steel cutting) SEE OUR 18DHY-18Bar or 20DHY-20Bar COMPRESSOR OPTIONS |
| Working Environment | Temperature:0-45C, Humidity 5-95% (No Condensate Water) |
| Technical Parameters | Specification |
| Laser Power | 1kW, 1.5kW, 2kW, 3kW, 4kW, 6kW |
| Tube Length | LF60M – 6m Standard model – up to 6500mm tube length (350mm minimum stock length) LF90M – 9m model – up to 9500mm tube length (350mm minimum stock length) |
| Minimum waste stock length | 100mm |
| Clamp Diameter | 20-240mm standard (20-280mm Chuck or 20-360mm chuck upgrade available) |
| Tube weight capacity | 240mm chuck = 500kg, 280mm chuck = 400kg, 550mm chuck = 500kg |
| Machine Size | LF60M – 11900mm*1580mm*2260m (including collection draw) LF90M – 15454mm*19190mm*2515m (including collection draw) |
| Laser source type | Raycus or IPG |
| Laser Head Type | Raytools automatic focussing fine tipped “3D” laser head ≤3kW = BM111 4kW = BD04K 6kW = BD08K (5 axis head options available – Raytools GF40 or German LT) |
| Cooling Type | Industrial Water Cooling – S&A water chiller |
| Cutting Speed | 30m/min |
| Acceleration | 1.5G |
| Laser Output Control | 0-100% set by software |
| Drive method | TBI ball screen drive, Panasonic servo motor control with Hiwin guide rails |
| Positioning Accuracy | 0.03 mm |
| Re-positioning accuracy | 0.02mm |
| Minimum line width | 0.1mm |
| Controlling Software | Cypcut Control System 5000 – sheet cutting, TubesT lite (standard) or TubesT Pro upgrade – tube |
| Graphic Format Supported | Graphics files – Ai, DXF, PLT, Gerber, G code – MaterCam, Type3, Wentai etc. |
| Compatible Software | Illustrator, photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc. |
| Colour Separation | Yes (imports colours to control cutting layers) |
| Auxiliary Equipment | Exhaust fan, Industrial water cooling unit |
| Power Supply | Machine: 1kW = 415V 50Hz 20amp 1.5kW = 415V 50Hz 32amp 2kW = 415V 50Hz 50amp 3kW = 415V 50Hz 50amp 4kW = 415V 50Hz 60amp 6kW = 415V 50Hz 63amp |
| Gas Regulation | Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure) And high pressure N2 and Compressed air electronic regulator (high pressure cutting) |
| Gas Connection | O2 (mild steel and copper cutting) – 4 pack min Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure N2 (Stainless, Aluminium, Brass and thin Mild steel cutting) – 9 pack min Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure Compressed air (Stainless, Aluminium, Brass and thin Mild steel cutting) SEE OUR 18DHY-18Bar or 20DHY-20Bar COMRESSOR OPTIONS |
| Working Environment | Temperature:0-45C, Humidity 5-95% (No Condensate Water) |
Prompt and efficient delivery
Onsite or over the phone support
Your payment information is processed securely
Machine Sale Enquires sales@koenigmachinery.com.au Material Shop Order Enquires admin@koenigmachinery.com.au Machine Troubleshooting service@koenigmachinery.com.au
Unit 10, 242D New Line Road Dural NSW 2158 Australia
