LF3015P Pro Enclosed Fiber Laser

LF3015P Pro





fiber laser slide out table
Fiber laser

LF3015P Pro - Enclosed Compact Fiber laser with slide out table Laser
1-6kW

Industrial Metal Fiber Laser Cutter
3000x1500mm bed 
From $96,900+GST

Request a Quote

The LF3015P Pro is our new 3000x1500mm bed size machine, with slide-out table. This innovative design allows for a fully enclosed large-formal bed size with minimal footprint in your factory floor. With slide out table, this machine can be easily loaded by overhead crane, jib-crane, forklift or by hand. The sliding table magnetically locks into place, with electronic closing access door for the
ultimate safety enclosure.

With compact all-in-one design there is a 90degree orientation of the gantry with longer X axis, allowing for faster overall production. With Raytools automatic focussing laser head, Cycpcut software and CBS surface tracking system, this machine does not compromise on output or quality, but reduces the factory footprint required while still providing a full safety enclosure. 

Video Demonstration

Materials and Applications


MaterialsStainless steel, carbon steel, alloy steel, spring steel, brass, aluminium, gold, silver, titanium plates, etc.

ApplicationsAdvertising boards, outdoor and indoor signs, metal labels, data plates, jewellery and accessories, machinery panels, metal plate structure, machinery components, car panels and components, electric parts, spring sheet, subway and rail line spare parts, homewares, promotional gifts and products, small to large scale prototype design, mechanical hardware, pergola screens and panels, etc.

How Thick Can You Cut? 
Fiber Laser Cutting Thickness Chart

Examples

Features

  •  3000x1500mm fully enclosed machine
  • Smooth manual slide-out table design with magnetic locking
  • Electronic closing main door/lid
  • Compact design with built-in electronic cabinet
  • Built in internal cameras and monitoring screen
  • Cypcut software - Easy to use and compatible with most files
  • Automatic edge seeking/ nesting / fly-cutting etc.
  • BCS100 Automatic material tracking - Follows material surface
    allowing cutting of materials with sight bending or warping
  • Raytools precision automatic focussing laser head
  • Large Portrait style monitor screen
  • Built-in computer, screen and wireless controller
  • Aviation 3rd generation aluminium gantry - Lightweight/strong
  • Yaskawa motor drive - 1.0G Acceleration
  • YYC rack pinion and gear system
  • French Moto Reducer gear reducer
  • Heavy pallet welded bed - for increased stability and lifetime
  • Automatic lubrication system
  • Ball bearing rollers for loading on the front
  • Drive assembly below the bed on both sides allowing for easy
    loading and offloading
  • Head tracking under-table exhaust system- follows the head
    while cutting for maximum extraction, exhaust fan included.
  • Electronic regulators for all gas connections O2, N2 and
    compressed air, allowing for fully software-controlled pressure

Aviation 3rd Generation Aluminium Gantry

The aviation 3rd generation aluminium gantry is manufactured with aerospace standards and formed by 4300 tons press extrusion moulding. After aging treatment, its strength can reach 6061 T6.

Aviation aluminium has many advantages, such as exceptional toughness, corrosion resistance and anti-oxidation. Image showing Aviation Aluminium beam in GWEIKE fiber lasers

Automatic Focussing Laser Head

The software adjusts the focussing lens to determine the most suitable position for different thicknesses of material. Automatically adjusting the focus lens is ten times faster than manual adjusting, saving you time.

Both lenses have water-cooling heat sink, which improves longevity by reducing the temperature of the cutting head.

Segmented Rectangular Tube Welded Bed

Within the internal structure of the bed is a honeycomb structure that is welded with a number of rectangular tubes. Stiffeners are arranged inside the tubes to increase the strength and tensile strength of the bed.

This also increases the resistance and stability of the guide rail to effectively avoid deformation of the bed for 20+ years.

Dual Camera Set Up with Viewing Screen

The dual camera system allows you to monitor both the internal table and the loading table at the front of the machine. The visuals are displayed on a convenient viewing screen located on the exterior.

This allows you to observe multiple sections at one time, giving you peace of mind and improving productivity.


Compact Built-in Electrical Cabinet and Slide-out Table

Compact enclosed machine with built in electrical Cabinet, allowing for a smaller footprint in your factory and a lower overall cost due to low cost international shipping footprint.  Slide out table allows for easy loading/unloading and again reduces the footprint overall. 

18 DHY - 18 bar Air Compressor

20DHY - 20 bar Air Compressor (recommended)

Light Curtain Safety Barrier System

Light Curtain Safety Barrier System - Protection for Machinery

PA-5000SA -
Self Flushing Laser Fume Extractor

Laser Fume Extractor for Machinery

Automatic Nozzle Exchanger -

Programmed to Collect Nozzle - 8 Nozzle Assembly

Gas Attachment Package

2 x 5m Hoses, O2 & N2 Regulators + Standard Gas Pack Connection Type 50/51
Gas Attachment Package - 2*5m hoses and fittings. O2 and N2 regulators with standard gas pack connection Type 50 or 51

CypNest Software Upgrade for Advanced Nesting Capabilities

CypNest Software Upgrade Logo for advanced nesting capabilities
Technical Parameters Specification
Laser Power 1-6kW
Bed Size 3000 x 1500mm 
Machine Size 4700*3330*2415mm
Laser Source Type Raycus or IPG
Laser Head Type Raytools automa􀆟c focussing laser head
≤ 3kW = BM111
4kW - 6kW = BM114
Cooling Type Industrial Water Cooling – S&A water chiller
Moving Speed 80m/min
Acceleration 1.0G
Laser Output Control 0-100% set by software
Drive Method YYC rack and pinion system, Moto reducer gear reducer, Yaskawa motor drive
Positioning Accuracy 0.03 mm
Re-Positioning Accuracy 0.02mm
Minimum Line Width 0.1mm
Controlling Software Cypcut Control System 2000E, including nes􀆟ng, edge seeking and automa􀆟c crash protec􀆟on
Graphic Format Supported Graphics files – Ai, DXF, PLT, Gerber, etc. G code – MaterCam, Type3, Wentai etc.
Compatible Software Illustrator, Photoshop, CorelDraw, Autocad, Solidworks, MaterCam, Type3, Wentai etc.
Colour Separation Yes (imports colours to control cutting layers)
Auxiliary Equipment Exhaust fan, Industrial water cooling unit
Power Supply Machine:
1kW = 380V 50Hz 20amp (415V filter supplied)
1.5kW = 380V 50Hz 32amp (415V filter supplied)
2kW = 380V 50Hz 40amp (415V filter supplied)
3kW = 380V 50Hz 50amp (415V filter supplied)
4kW = 380V 50Hz 60amp (415V filter supplied)
Gas Regulation Software controlled electronic low- pressure O2 regulator (for fine adjustment at low pressure)
And high pressure N2 and Compressed air electronic regulator (high pressure cuttng)
Gas Connection O2 (mild steel and copper cu􀆫ng) – 4 pack min
Min 99.7% purity – 10m3/h maximum flow rate – 10bar max pressure
N2 (Stainless, Aluminium, Brass and thin Mild steel cu􀆫ng) – 9 pack min
Min 99.9% purity – 40m3/h maximum flow rate – 24bar max pressure
Compressed air (Stainless, Aluminium, Brass and thin Mild steel cu􀆫ng)
SEE OUR 18DHY-18Bar or 20DHY-20Bar COMRESSOR OPTIONS
Working Environment Temperature: 0-45C, Humidity 5-95% (No condensate water)

WHAT ELSE DO YOU NEED TO KNOW?

See our FAQs page for more information

Have a question or not sure what solution is right for you? Contact us and let us help you today

© 2024 Koenig Machinery. All Rights Reserved.