A fully enclosed machine gives additional safety and protection. You can view of your work in action while protecting your eyes from the CO2 laser beam thanks to the clear access lid.
The 120 degree overhead camera allows you to view the entire work bed of your machine. When combined with the Lightburn software, you can use the camera to position designs on materials, trace simple artwork and minimise waste/scrap material.
Servo motors are included as standard for a high level of accuracy and precision.
If the lid is opened during use, the interlocking sensor in the laser lid will stop the machine from running. All other doors have key locks. Looking for a machine for Educational use? Ask us about the Education Model upgrade with interlocking sensors in all machine doors.
4-way feed through allows you to feed material through the machine front-to-back and left-to-right, increasing the capacity of your machine while keeping a small footprint and full enclosure. Feed through a full 1220x2440 sheet!
The in-line beam combiner provides a red LED light travelling at the same trajectory as the invisible CO2 laser beam. This allows for easy mirror alignment during set-up and general maintenance, making your user experience practically trouble free!
Origin rulers provide you with a quick and easy way to align your workpiece to the origin of the bed when cutting and manually measure points of reference. You can also move the laser head to a position on the bed and create a starting point from here, so cutting from offcuts and scrap pieces is made easy. You will have more productivity, less wastage and complete control over your cutting process.
An automatic height adjust head is now standard on all machines, allowing you to quickly and safely set the focal height of the machine in reference to the material placed on the bed. With a click of a button you are ready to start cutting.
We now provide both RDworks and Lightburn Software with your machine. RDworks is compatible with PC and Lightburn is compatible with both PC and MAC OS computers allowing you to have a streamline design process. The Lightburn software package features easy, intuitive functionality. Click here to trial the Lightburn software.
Our K1309C machine has been designed with a solid welded chasis frame. Please review dimensions of the machine as it will not fit through a standard door frame. For internal machine set ups please ask us about our air filter options.
The Z (up-down) travel of the machine is 200mm, allowing the machine to be used with either a wheel or chuck type rotary device for cutting and engraving onto large objects.
There is a conical table with under table extraction connection, for better quality extraction. The conical shape also helps to capture and parts or offcuts and channel them into the clean-up drawer.
LED internal lighting allows you to easily view your workpiece through the protective lid.
Our S&A CW5200 water chiller is included with both the 100W and 150W power options. Our standard compressor and extraction fan are included. Ask us about our High-powered compressor for optimal quality clean cutting, and out air filtration units for filtering all particles and fumes from the air (recommended for office and at home machine set-up).
- Dedicated Australian technical support, with local on-site technician for set-up or when required.
- FREE lifetime technical support for the lifetime of the machine over the phone, email or remote computer access (on-site service available)
- 1 year Warranty covering all machine parts + 9 month laser tube warranty.
|100W (150W available)
|1300 x 1300mm
|200mm travel - motorised up-down table
|RECI CO2 Glass Tube 10.6μm – up to 10,000 hour life
|Machine Footprint (total size)
|1870 x 1770 x 1090(H)mm
|Knife bed table included (optional honeycomb table available)
|Leadshine Servo Motor
|120degree overhead camera – 8Mb
|+/- 0.5mm (calibratable by user)
|Hiwin Taiwanese Rails
|Fan and extraction hosing provided (4 stage air filters optional)
|S&A CW5200 refrigerating water chiller included
|Up to 1000mm/s
|Up to 300mm/s
|Min. Engraving Size
|DSP Control System
|RDworks and Lightburn – licence included (including print registration mark alignment using 'print and cut' feature)
|Windows, Mac OS or Linux (32 or 64-bit)
|Graphic Format Supported
|DXF DWG AI PDF DST PLT BMP JPG PNG etc.
|Machine File Memory
|128MB internal memory (up to 100 files)
|230V 50Hz 10amp – standard single phase
NOTE: 100W will cut up to 15mm acrylic and 14mm woods/plys in 1 pass
150W will cut up to 20mm acrylic, 18mm woods and plys in 1 pass
Use this text to share information about your brand with your customers.
Describe a product, share announcements, or welcome customers to your store.