Metal and Non-metal cutting laser machine cutting up to 20mm acrylic and 18mm wood/ply in 1 pass, up to1.5mm mild steel and 1mm stainless steel.
Fully enclosed machine for additional safety and protection. Our clear access lid gives you a view of your work in action while protecting your eyes for the CO2 laser beam. The interlocking sensor in the laser lid will stop themachine from running if the lid is opened during use. All other doors have key locks. If you are looking for an Education machine, ask us today about our EDUCATION model upgrade and interlocking sensors in all machine doors.
4-way feed through allows you to feed material through the machine front-to-back and left-to-right, increasing the capacity of your machine while keeping a small footprint and full enclosure. Feed through a full 1220x2440 sheet!
The In-line beam combiner provides a red LED light travelling at the same trajectory as the invisible CO2 laser beam. This allows for easy mirror alignment during set-up and general maintenance, making your user experience practically trouble free!
Our Origin rulers provide you with a quick and easy way to align your workpiece to the origin of the bed when cutting and manually measure points of reference. You can also move the laser head to a position on the bed and create a starting point from here, so cutting from offcuts and scrap pieces is made easy. You will have more productivity, less wastage and complete control over your cutting process.
Our Automatic height adjust head is standard on the K1309M for metal cutting and tracks the surface height for metal cutting consistency, allowing you to quickly and safely set the focal height of the machine in reference to the metal material pleased on the bed. Manual height adjustment for non-metal cutting.
We now provide both RDworksand Lightburn Software with your machine. RDworks is compatible with PC and Lightburn is compatible with both PC and MAC OS computers allowing you to have a streamline design process. We love the Lightburn software package with its easy, intuitive functionality and we know you will too. Click here to trial the lightburn software
Our K1309 machine has been designed with a solid welded chasis frame. Please review dimensions of the machine as it will not fit through a standard door frame. For internal machine set ups please ask us about our air filter options.
The Z (up-down) travel of the machine is 200mm, allowing the machine to be used with either a wheel or chuck type rotary device and allowing for cutting and engraving onto large objects.
There is a Conical table with under table extraction connection, for better quality extraction. The conical shape also helps to capture and parts or offcuts and channel them into the clean-up drawer
LED internal lighting you to easily view your workpiece cutting through the tinter protective lid.
Our S&A CW5200 Water chiller is included with both the 100W and 150W power options. Our standardcompressor and extraction fan are included. Ask us about our Software integrated High-powered compressor option for optimal quality clean cutting, and our air filtration units for filtering all particles and fumes from the air (recommended for office and at-home machine set-up)
Oxygen gas is required for Metal cutting and is not included with the machine.
|Cutting area||1300 x 900mm|
|Z axis||Static table 50mm cutting height|
|Laser Type||RECI CO2 Glass Tube 10.6μm – up to 10,000 hour life|
|Machine footprint (total size)||1868 x 1468 x 1180(H)mm|
|Table type||Knife bed table included (optional honeycomb table available)|
|Motor Type||Nema Stepper Motor|
|Rail type||Haiwin Taiwanese Rails|
|Ventilation||Fan and extraction hosing provided (4 stage air filters optional)|
|Cooling Type||S&A CW5200 enclosed water chilling unit included|
|Engraving Speed||Up to 300mm/s|
|Cutting Speed||Up to 200mm/s|
|Min. Engraving Size||1.0mm*1.0mm|
|Controlling Software||DSP Control System|
|Software||RDworks and Lightburn|
|Computer compatibility||Windows, Mac OS, or Linux (32 or 64-bit)|
|Graphic Format Supported||DXF DWG AI PDF DST PLT BMP JPG PNG etc|
|Machine file memory||128MB internal memory (up to 100 files)|
|Power Supply||230V 50Hz 10amp– Standard single phase|
NOTE: 100W will Cut up to 20mm acrylic, 18mm woods and plys in 1 pass.
Up to 1.5mm Carbon/Mild/Galvanised Steel, up to 1mm Stainless Steel.
What about support? At Koenig Machinery we pride ourselves on the quality of our after sales service and support. We are here to see you succeed and help you along the way, whether it is a service call you need or a quick chat to help you find the right settings for your material, we are here to support you. With ongoing free phone and email support for the life of your machine.
Where Can I get the Oxygen gas? For smaller bottles and getting started you can look to rent cylinders and buy the regulator from you local hardware store. For heavier usage look at BOC and Supergas for ongoing supply, rental and gas delivery
Are you looking for finance? We have several finance options that we can offer, and we are happy to work with your existing financial brokers. Give us a call today for more information and pricing options.
How does set up and delivery work? Contact us with your postcode and we will be able to give you an accurate quote for shipping and installation at your premises. Installation by one of our highly trained technicians is recommended, however if you are in a rural area and want to look at setting up the machine yourself you can do this as well, we have videos and guides to help you through the installation process.
Where can I buy the acrylic and materials? Have a look at our shop! We sell a range or standard, pastel, glitter and pearl acrylics, plywood, bamboo and consumables such as application tape, double sided tape, cermark for metal marking and much more. Check it out here.