FEATURES

A fully enclosed machine gives additional safety and protection. You can view of your work in action while protecting your eyes from the CO2 laser beam thanks to the clear access lid.

The 120 degree overhead camera allows you to view the entire work bed of your machine. When combined with the Lightburn software, you can use the camera to position designs on materials, trace simple artwork and minimise waste/scrap material.

Servo motors are included as standard for a high level of accuracy and precision.

If the lid is opened during use, the interlocking sensor in the laser lid will stop the machine from running. All other doors have key locks. Looking for a machine for Educational use? Ask us about the Education Model upgrade with interlocking sensors in all machine doors.

4-way feed through allows you to feed material through the machine front-to-back and left-to-right, increasing the capacity of your machine while keeping a small footprint and full enclosure. Feed through a full 1220x2440 sheet!

The in-line beam combiner provides a red LED light travelling at the same trajectory as the invisible CO2 laser beam. This allows for easy mirror alignment during set-up and general maintenance, making your user experience practically trouble free!

Origin rulers provide you with a quick and easy way to align your workpiece to the origin of the bed when cutting and manually measure points of reference. You can also move the laser head to a position on the bed and create a starting point from here, so cutting from offcuts and scrap pieces is made easy. You will have more productivity, less wastage and complete control over your cutting process.

An automatic height adjust head is now standard on all machines, allowing you to quickly and safely set the focal height of the machine in reference to the material placed on the bed. With a click of a button you are ready to start cutting.

We now provide both RDworks and Lightburn Software with your machine. RDworks is compatible with PC and Lightburn is compatible with both PC and MAC OS computers allowing you to have a streamline design process. The Lightburn software package features easy, intuitive functionality. Click here to trial the Lightburn software.

Our K1309C machine has been designed with a solid welded chasis frame. Please review dimensions of the machine as it will not fit through a standard door frame. For internal machine set ups please ask us about our air filter options.

The Z (up-down) travel of the machine is 200mm, allowing the machine to be used with either a wheel or chuck type rotary device for cutting and engraving onto large objects.

There is a conical table with under table extraction connection, for better quality extraction. The conical shape also helps to capture and parts or offcuts and channel them into the clean-up drawer.

LED internal lighting allows you to easily view your workpiece through the protective lid.

Our S&A CW5200 water chiller is included with both the 100W and 150W power options. Our standard compressor and extraction fan are included. Ask us about our software integrated high-powered compressor option for optimal quality clean cutting, and our air filtration units for filtering all particles and fumes from the air (recommended for office and at-home machine set-up).

WHY CHOOSE KOENIG?

- Dedicated Australian technical support, with local on-site technician for set-up or when required.

- FREE lifetime technical support for the lifetime of the machine over the phone, email or remote computer access (on-site service available)

- 1 year Warranty covering all machine parts + 9 month laser tube warranty.

Technical Parameters Specification
Laser Power 150W (100W available)
Cutting Area 1300 x 900mm
Z Axis 200mm travel - motorised up-down table
Laser Type RECI CO2 Glass Tube 10.6μm – up to 10,000 hour life
Machine Footprint (total size) 1868 x 1468 x 1090(H)mm
Machine Weight 470kg
Table Type Knife bed table included (optional honeycomb table available)
Motor Type Leadshine Servo Motor
Camera 120degree overhead camera – 8Mb
Camera Alignment +/- 0.5mm (calibratable by user)
Rail type Hiwin Taiwanese Rails
Ventilation Fan and extraction hosing provided (4 stage air filters optional)
Cooling Type S&A CW5200 refrigerating water chiller included
Engraving Speed Up to 1000mm/s
Cutting Speed Up to 300mm/s
Min. Engraving Size 1.0mm*1.0mm
Locating Accuracy ≤+0.01mm
Controlling Software DSP Control System
Software RDworks and Lightburn – licence included (including print registration mark alignment using 'print and cut' feature)
Computer Compatibility Windows, Mac OS or Linux (32 or 64-bit)
Graphic Format Supported DXF DWG AI PDF DST PLT BMP JPG PNG etc.
Machine File Memory 128MB internal memory (up to 100 files)
Power Supply 230V 50Hz 10amp – standard single phase

WHAT CAN YOU DO WITH THE K1309 CO2 LASER MACHINE?

K0604_K0906_K1309_cutting_parameters

NOTE: 100W will cut up to 15mm acrylic and 14mm woods/plys in 1 pass

150W will cut up to 20mm acrylic, 18mm woods and plys in 1 pass

EXAMPLES

Wheel Rotary

Wheelrotary

Chuck Rotary

Image 2

Honeycomb Table

Image 3

High Powered Quiet Compressor

king2400

Pure air filtration unit

Image 5

Digital control Pure air filtration unit

Image 6

WHAT ELSE DO YOU NEED TO KNOW?

What about support? At Koenig Machinery we pride ourselves on the quality of our after sales service and support. We are here to see you succeed and help you along the way. This might be in the form of a service call or simply a quick chat to help you find the right settings for your material. Whatever you need: We're here to support you with ongoing free phone and email support for the life of your machine.

Are you looking for finance? We have several finance options that we can offer and we are happy to work with your existing financial brokers. Give us a call today for more information and pricing options.

How does set up and delivery work? Contact us with your postcode and we will be able to give you an accurate quote for shipping and installation at your premises. Installation by one of our highly trained technicians is recommended, however if you are in a rural area and want to look at setting up the machine yourself, you can do this as well. We have videos and guides to help you through the installation process.

Where can I buy the acrylic and materials? Have a look at our shop! We sell a wide range of standard colour acrylic, pastel acrylic, glitter acrylic and pearl acrylic. We also stock plywood, bamboo and consumables such as application tape, double sided tape, CerMark spray for metal marking and much more. Check out the Koenig Shop here.

See our FAQs page for more information

Have a question or not sure what solution is right for you? Contact us and let us help you today

© 2022 Koenig Machinery. All Rights Reserved.