A fully enclosed machine gives additional safety and protection. You can view of your work in action while protecting your eyes from the CO2 laser beam thanks to the clear access lid.

The 120 degree overhead camera allows you to view the entire work bed of your machine. When combined with the Lightburn software, you can use the camera to position designs on materials, trace simple artwork and minimise waste/scrap material.

Servo motors are included as standard for a high level of accuracy and precision.

If the lid is opened during use, the interlocking sensor in the laser lid will stop the machine from running. All other doors have key locks. Looking for a machine for Educational use? Our CO2 laser machines are practical for use in schools, universities, TAFE institutes and other educational settings.

4-way feed through allows you to feed material through the machine front-to-back and left-to-right, increasing the capacity of you machine whilst still keeping a small footprint and full enclosure.

The in-line beam combiner provides a red LED light travelling at the same trajectory as the invisible CO2 laser beam. This allows for easy mirror alignment during set-up and general maintenance, making your user experience practically trouble free!

Origin rulers provide you with a quick and easy way to align your work piece to the origin of the bed when cutting and manually measure points of reference. You can also move the laser head to a position on the bed and create a starting point from here, so cutting off cuts and scrap pieces is easy. You will have more productivity, less wastage and complete control over your cutting process.

Our automatic height adjust head is now standard on all machines, allowing you to quickly and safely set the focal height of the machine in reference to the material placed on the bed. With a click of a button you are ready to start cutting.

We now provide both RDworks and Lightburn Software with your machine. RD works is compatible with PC and Lightburn is compatible with both PC and MAC OS computers allowing you to have a streamlined design process. The Lightburn software package features easy, intuitive functionality Click here to trial the Lightburn software. Click here to trial the light burn software.

The K0604C machine has been designed with removable legs, to allow the machine to be taken through a standard door frame. The base wheel frame is removable and when the machine is tipped on its side the width is 770mm (standard door frame 800mm), allowing for the machine to be set up in an office environment. For internal machine set ups please ask us about our air filter options.

There is a conical table with under table extraction connection, for better quality extraction. The conical shape also helps to capture and parts or off cuts and channel them into the clean-up drawer

LED internal lighting allows you to easily view your workpiece by looking through the protective lid.

Our S&A CW3000 water chiller is included with the 40W power machine and the CW5200 water chiller is included with the 80W machine. Our standard compressor and extraction fan are also included. Ask us about our software integrated high-powered compressor option for optimal quality clean cutting, and out air filtration units for filtering all particles and fumes from the air (recommended for office and at home machine set-up).


- Dedicated Australian technical support, with local on-site technician for set-up or when required.

- FREE lifetime technical support for the lifetime ofthe machine over the phone, email or remote computer access (on-site service available)

- 1 year Warranty covering all machine parts + 9 month laser tube warranty.

Technical Parameters Specification
Laser Power 40W (80W available)
Cutting Area 600 x 400mm
Z Axis 200mm travel - motorised up-down table
Laser Type RECI CO2 Glass Tube 10.6μm – up to 10,000 hour life
Machine Footprint (total size) 40W - 1140 x 1025 x 1090(H)mm, 80W - 1710 x 1025 x 1090(H)mm
Machine Weight 290kg
Table Type Knife bed table included (honeycomb table optional extra)
Motor Type Leadshine Servo Motor
Camera 120 degree overhead camera – 8Mb
Camera Alignment +/- 0.5mm (calibratable by user)
Rail Type Hiwin Taiwanese Rails
Ventilation Fan and extraction hosing provided (4 stage air filters optional extra)
Cooling Type S&A CW3000 enclosed water chilling unit included (5200 refrigerating type upgrade available for hotter environments)
Engraving Speed Up to 1000mm/s
Cutting Speed Up to 300mm/s
Min. Engraving Size 1.0mm*1.0mm
Locating Accuracy ≤+0.01mm
Controlling Software DSP Control System
Software RDworks and Lightburn – licence included (including print registration mark alignment using 'print and cut' feature)
Computer Compatibility Windows, Mac OS or Linux (32 or 64-bit)
Graphic Format Supported DXF DWG AI PDF DST PLT BMP JPG PNG etc.
Machine File Memory 128MB internal memory (up to 100 files)
Power Supply 230V 50Hz 10amp – Standard single phase


K0604 K0906 K1309 Cutting Parameters

NOTE: 40W will cut up to 6mm acrylic and 5/6mm woods/plys in 1 pass

80W will cut up to 12mm acrylic, 10mm woods and plys in 1 pass


Gallery imageGallery imageGallery imageGallery imageGallery imageGallery imageGallery image
© 2024 Koenig Machinery. All Rights Reserved.